ViewSonic PJD5231, PJD5211, PJD5221, PJD5122, VS13305 Timing of replacing the lamp, Status Message

Page 48

Timing of replacing the lamp

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.

CAUTION

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See "Indicators" on page 49 for details.

The following lamp warning displays will remind you to change the lamp.

Status

Message

The lamp has been in operation for 3500 hours.

Notice

Install a new lamp for optimal performance. If the

Order Replacement Lamp

projector is normally run with Economic selected

(See "Setting Lamp mode as Economic" on page

Lamp > 3500 Hours

44), you may continue to operate the projector

 

until the 3950 hour lamp warning appears.

OK

 

 

 

The lamp has been in operation for 3950 hours. A

Notice

new lamp should be fitted to avoid the

 

inconvenience when the projector runs out of lamp

Replace Lamp Soon

time.

Lamp > 3950 Hours

 

OK

 

 

The lamp has been in operation for 4000 hours.

Notice

It is strongly recommended that you replace the

Replace Lamp Now

lamp at this age. The lamp is a consumable item.

Lamp > 4000 Hours

The lamp brightness diminishes with use. This is

Lamp usage time exceeded

normal lamp behavior. You can replace the lamp

 

whenever you notice that the brightness level has

OK

significantly diminished. If the lamp is not

 

replaced beforehand, it must be replaced after

 

4000 hours usage.

 

The lamp MUST be replaced before the projector

Notice

will operate normally.

Lamp usage time exceeded

 

 

Replace lamp (refer to User Manual)

 

Then reset lamp timer

 

OK

 

 

Maintenance 45

Page 47 Page 49
Image 48
Page 47 Page 49
Contents ViewSonic Compliance Information Substance Actual ConcentrationLead Pb Mercury Hg Cadmium Cd Hexavalent Chromium Cr6+ Polybrominated biphenyls PBBCopyright Information Table of contents Safety Instructions Important safety instructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionIntroduction Shipping contents Projector exterior view Projector and remote control Controls and functionsLamp indicator light Color ModeVolume keys + AutoRemote control effective range Pull out the battery holderPositioning your projector Choosing a locationProjection dimensions Screen Center of lensConnecting a computer or monitor Connecting a computerConnection To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorMonitor Computer VGA to DVI Cable VGA cable Connecting Video source devices Connecting audioBest video quality Better video qualityConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceAV device Speakers Audio cable Video cable Cable Connecting a composite Video source device To connect the projector to a composite Video source deviceSpeakers AV device Video cable Audio cable Cable Operation Starting up the projectorOperation See Timing chart on page 52 for details Using the menus Use / to highlight the System Setup Basic menuSystem Setup Basic System Setup AdvancedUtilizing the password function Setting a passwordIf you forget the password New passwordEntering the password recall procedure Changing the passwordDisabling the password function Switching input signal Adjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarity Correcting keystoneMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Selecting a picture mode Picture modes for different types of signalsPC input signals D-Sub / Comp /2 analog RGB Video input signals S-Video, Video, D-Sub / Comp /2 YPbPrUsing Screen Color Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant ColorTo adjust the settings Color ManagementHiding the image Locking control keysOrder to draw the audiences full attention to To activate the High Altitude Mode Freezing the imageOperating in a high altitude environment Press MENU/EXIT on the projector or MenuPersonalizing the projector menu display Shutting down the projectorMenu operation Menu systemMain menu Sub-menu Options Basic AdvancedDescription of each menu Color Mode SettingsReference ModeAuto Power Blank TimerTimer ProjectorSystem Setup Advanced menu Function Description Active VGA OutAudio MenuAdvanced Settings Reset All LampSecurity CurrentMaintenance Care of the projectorSetting Lamp mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Type number RLC-055 PJD5122/PJD5211/PJD5221 RLC-056 PJD5231Loosen the screw that secures the lamp Maintenance Resetting the lamp timer Tighten the screw that secures the lampRestart the projector Indicators Power eventsLight Status & Description Lamp eventsTroubleshooting Cause RemedySpecifications Projector specificationsDimensions Ceiling mount installationTiming chart Signal Format Horizontal Frequency kHz HorizontalCopyright information Copyright informationRS232 command table AppendixIR control table Pin assignment for this two endInterface RS-232 protocolBaud Rate Data Length Bit Parity Check None Stop BitContrast Write Blank on 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x09 0x01 VGA Hour Customer Support Limited Warranty How to get service PRJLW01 Rev hMexico Limited Warranty Viewsonic ProjectorNúmero Gratis DE Asistencia Técnica Para Todo México

PJD5211, VS13304, VS13306, PJD5221, VS13305 specifications

The ViewSonic PJD5122, VS13308, PJD5231, VS13305, and PJD5221 are part of ViewSonic's well-regarded projector lineup, designed to cater to various projection needs. These models provide high-quality imaging, portability, and user-friendly features that make them suitable for both educational and business environments.

The ViewSonic PJD5122 is a DLP projector that boasts a native SVGA resolution of 800x600, delivering clear images with vibrant colors and a brightness of 2,600 lumens. It employs DynamicEco technology, which enables users to save energy and extend lamp life by automatically lowering brightness when the projector is not in use. Enhanced connectivity options, including HDMI, VGA, and composite inputs, make it versatile for various devices.

The VS13308 model stands out with its compact design and lightweight build, making it easy to transport. With a brightness of 3,000 lumens and a native resolution of 800x600, it excels in both dim and well-lit environments. The projector features an impressive contrast ratio, ensuring rich, dark blacks for a more dynamic viewing experience. Its long lamp life of up to 10,000 hours means reduced maintenance costs.

The PJD5231 offers a native XGA resolution of 1024x768 and a brightness of 3,000 lumens, making it ideal for classrooms and conference rooms. This model utilizes a 3D-ready capability, providing an immersive viewing experience for 3D content. Users can easily connect multiple devices through its extensive input options, including VGA and composite, enhancing its flexibility.

The VS13305 model is engineered for versatility, with a brightness of 3,200 lumens and a native resolution of 800x600. It includes features like Energy-saving mode, which decreases power consumption and extends the life of the lamp. Its lightweight design makes it suitable for mobile professionals who require seamless portability.

Lastly, the PJD5221 also offers a native XGA resolution, combined with a brightness of 3,200 lumens, ensuring crisp details even in large rooms. The projector also supports a wide range of connection options and is equipped with built-in speakers, allowing for an all-in-one entertainment solution.

Together, these projectors highlight ViewSonic's commitment to delivering innovative display solutions with cutting-edge technologies, making them reliable choices for those in need of quality projection for various applications.
Top Page Image Contents