Intel SC5275-E, C50277-001 manual Installing 3.5-inch Hard Drive

Page 38

2 Setting Up the Chassis

Installing 3.5-inch Hard Drive

Six 3.5-inch half-height bays provide space for hard drives. For proper cooling, always install drives into the four center bays first

NOTE

The drive bay cage can only be fully populated with six hard drives if the power budget has the capacity for it, such as when only a single processor is used. Before installing more than four hard drives, calculate the power used by each installed device and compare it to the allowed power budget.

When installing more than four drives a Y-cable may be needed for the power connectors.

1.If the hard drive bay cage is not already removed, remove and save the four screws that secure the drive cage to the chassis. Two screws are at the front of the chassis and two are at the side of the chassis.

2.Slide the drive cage out of the chassis. You may need to push the cage out from the inside of the chassis. Set the cage down so that the arrow on the front of it points up.

3.Remove the drive from its protective wrapper and place it on an antistatic surface.

4.Record the drive model and serial numbers in your equipment log.

5.Set any jumpers or switches on the drive according to the drive manufacturer’s instructions.

Intel® Entry Server Chassis SC5275-E User Guide

20

Image 38
Contents Intel Entry Server Chassis SC5275-E User Guide Intel Entry Server Chassis SC5275-E User Guide About this Manual Product AccessoriesPreface Manual OrganizationAdditional Information and Software SC5275ESafety Information Emissions DisclaimerSafety Cautions Wichtige Sicherheitshinweise Intel Entry Server Chassis SC5275-E User Guide Viii 重要安全指导 Preface Instrucciones de seguridad importantes Intel Entry Server Chassis SC5275-E User Guide Xii Intel Entry Server Chassi s SC5275-E User Guide Xiii Preface Intel Entry Server Chassis SC5275-E User Guide Xiv Contents Regulatory and Compliance Information Technical ReferenceEquipment Log and Worksheets Tables Replacing the Front System Fan in a Standard Drive CagePage Chassis Description Kit ContentsFeature Summary Chassis Front View Front Panel Controls and Indicators LED DescriptionChassis Rear View Inch Removable Media Drive Bays Accessories and Order CodesPeripherals Inch Hard Drive BaysChassis Security Power SupplyChecking the Power Cord MonitoringMechanical Locks Mechanical LocksPage Safety Before You Remove the Access Covers Setting Up the ChassisInstallation Safety Instructions Tools and Supplies NeededSetting Up the Chassis Remove the Access Cover Removing the Access CoverRemove the Front Bezel Removing the Front BezelInstall the I/O Shield Installing the I/O ShieldInstall the Server Board Standoffs and Bumpers Install a 3.5-inch Floppy DriveDevice Installation Considerations Peripheral DrivesInstalling a 5.25-inch Removable Media Device IDE RequirementsSlide Rails Installing a Removable Media Device Install the Server Board Removing a Drive CageInstalling 3.5-inch Hard Drive Attaching a Hard Drive to a Cage Installing the Hard Drive Bay Cage Connect Cables to the Server Board Installing an Add-in Board Installing an Add-in Board Install the Front Bezel Installing the Front BezelInstall the Access Cover Installing the Access CoverPage Safety Before You Remove the Access Covers Maintaining Your ServerMaintaining Your Server Standard Hard Drive Bay Cage Replacing FansReplacing a Front System Fan Replacing a Rear System Fan Replacing the Power Supply Replacing the AC Power SupplyFront Panel Board Access Replacing the Front Panel BoardAttaching the Front Panel Cable Installing the USB Cable Replacing the USB CablePage Page Watt Single Power Supply Output Voltages Power Supply SpecificationsWatt Single Power Supply Input Voltages Watt Power SupplySystem Environmental Specifications Environmental SpecificationsEquipment Log and Worksheets Equipment LogEquipment Log Current Usage Calculating Power UsageWorksheet, Calculating DC Power Usage Worksheet, Total Combined Power Used by the Server Product Regulatory Compliance Product Safety ComplianceRegulatory and Compliance Information Product EMC Compliance Class a ComplianceCertifications / Registrations / Declarations Product Regulatory Compliance MarkingsElectromagnetic Compatibility Notices FCC USAIndustry Canada ICES-003 Europe CE Declaration of ConformityKorean RRL Compliance Vcci JapanBsmi Taiwan Regulated Specified Components Getting Help World Wide Web TelephoneMiami Extent of Limited Warranty WarrantyLimited Warranty for Intel Chassis Subassembly Products Warranty Limitations and Exclusions Limitations of LiabilityReturning a Defective Product How to Obtain Warranty ServiceTelephone Support