Basic Operation
Table 3 below refers to buttons on the projector control panel and on the remote control. Items marked with (*) may be accessed from the projector control panel.
|
| Table 3: Basic Operation |
|
| |
Item | Description | |
|
| |
INPUT SELECT | Select Input Signal (*) : press the INPUT Button. | |
| RGB VIDEO | |
(projector control panel) | Select RGB Input: Press the RGB button. | |
| ||
| Select Video Input: Press the VIDEO button. | |
| RGB |
|
| VIDEO |
|
| • The selected signal name is displayed for approximately 3 seconds when the input signal is | |
| changed. | |
POSITION | Set/Clear Position Adjustment mode : Press the POSITION button. | ||
| “POSITION” is displayed in the POSITION mode. |
| |
(projector control panel | Image Position Adjustment: Press the | buttons in the POSITION mode. | |
and remote control) | |||
|
| ||
•Valid only in the MAGNIFY mode when a video signal is input.
•After approximately 10 seconds of inactivity “POSITION” disappears and the POSITION mode is cleared automatically.
RESET (*) | Initialize Each item: Select an item and press the RESET button. | ||
| Initialize Position Adjustment: Press the RESET button in the POSITION mode. | ||
(projector control panel | This function is valid only when RGB signal is input. | ||
and remote control) | • Valid except for: VOLUME, LANGUAGE, H PHASE, and WHISPER. | ||
| |||
|
| ||
MAGNIFY | Set MAGNIFY Mode: Press the MAGNIFY “ON” button. | ||
| Move Magnified Area: Run the POSITION in the MAGNIFY mode. | ||
(remote control) | Adjust Magnification: Press the MAGNIFY | / | button in MAGNIFY mode. |
| |||
| MAGNIFY magnifies the image. MAGNIFY | ||
| Clear MAGNIFY Mode: Press the MAGNIFY |
| button. |
•The MAGNIFY mode is cleared by selecting AUTO, ASPECT, INPUT SELECT, or VIDEO, or changing the input signal.
FREEZE | Set/Clear FREEZE Mode: Press the FREEZE button. When the [ |
|
| ] icon is displayed, | |||||
|
| ||||||||
|
|
| |||||||
(remote control) | the image is frozen in the FREEZE mode. |
|
|
|
| ||||
• | The FREEZE mode is cleared by selecting POSITION, VOLUME, MUTE, Automatic | ||||||||
| |||||||||
|
| Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input signal. | |||||||
| • | Do not forget to clear frozen static images. |
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
KEYSTONE (*) | Set/Clear KEYSTONE Mode: Press the KEYSTONE | button. |
| ||||||
|
| ||||||||
(projector control panel | Adjust Keystone: Press the | / buttons in the KEYSTONE mode. |
| ||||||
and remote control) |
| reduces the width of the bottom of the projected image. reduces the width of the top of | |||||||
|
| ||||||||
| the projected image. |
|
|
|
|
| |||
|
|
|
| ||||||
VOLUME | Set/Clear VOLUME Mode: Press the VOLUME button to display the Volume menu, then | ||||||||
(remote control) | press | / buttons on the remote control to increase/decrease the loudness of the sound. | |||||||
After the desired volume is selected, press the VOLUME button again to exit the Volume | |||||||||
| |||||||||
| mode. |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
MUTE | Set/Clear Mute Mode: Press the MUTE button. The sound is silenced in this mode. | ||||||||
| |||||||||
(remote control) |
|
|
|
|
|
|
|
| |
ViewSonic PJ501/PJ551 | 10 |