ViewSonic PJ501, PJ551 manual Cabling, Power Connection

Cabling

Refer to the table below for connecting each terminal of the projector to a device.

Table 2: Cabling

Function	Terminal	Cable
Analog RGB input	RGB	Accessory RGB cable or optional
		RGB cable with D-sub 15-pin shrink
		jack and inch thread screws
RS-232C communication	CONTROL	Optional RS-232C cable
Component video input	VIDEO Y	Accessory component video cable
	VIDEO CB/PB
	VIDEO CR/PR
S-video input	S-VIDEO	Accessory S-video cable with mini
		DIN 4-pin jack
Video input/	VIDEO
Audio input	AUDIO (L)	Accessory video/audio cable with
	AUDIO (R)	RCA jacks
Audio Input	3.5 mm to mini-jack L/R	Optional

Warnings

•Incorrect connections could result in fire or electrical shock.

•Before connecting, turn off all devices to be connected.

•Use the cables that are packaged with the product. Refer to page 27.

•See “Power Cord Safety Guidelines” on page 28.

NOTE:

•Before connecting, read the instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device(s).

•Securely tighten the screws on the connectors.

•For some RGB input modes, the optional Mac adapter is necessary.

•Some computers may have multiple display screen modes. You may not be able to use some of the modes with this projector.

Power Connection

Use the correct power cord supplied with your projector. Connect the AC inlet of the projector to the power outlet as shown in the graphic below.

Figure 7: Power Cord Connect

7 ViewSonic PJ501/PJ551