OPTION Menu
The OPTION menu has 5 items as shown in theTable 9.
Please select the item you want to operate with the 
/ 
buttons and
press the 
button or the ENTER button to start operating. Then you can operate according to the following table.
Table 9: OPTION Menu
Item | Actions/Description |
|
|
|
|
VOLUME | Adjust Volume: Loud | Quiet |
| ||
|
|
|
AUTO OFF | Adjust AUTO OFF Time: |
|
•Long (MAX. 99 min.)
•Short (Min. 1 min.)
•(DISABLE: 0 min.)
The system automatically enters the standby mode when no signal is received for the set time. When the DISABLE (0 min.) is selected this function is inactive.
WHISPER | Select WHISPER Mode: | ||
| NORMAL | WHISPER | |
| The WHISPER mode is active when WHISPER is selected. In the WHISPER mode, acoustic | ||
| noise level from the unit is reduced and the brightness level on screen is lowered. | ||
|
| ||
LAMP TIME | Refer to Lamp Time: The starting of this item displays the time that the projector lamp has been | ||
| used. |
| |
| Reset Lamp Time [Use this function only when the lamp is replaced!] : Keep pressing the | ||
| RESET button for 3 seconds or more during the display of the lamp time. Then the menu for | ||
| reset will appear. When you have replaced the lamp, select the RESET on the menu with the | ||
| button. |
| |
| • | Do not reset the lamp time without replacing the lamp. Reset the lamp time always when | |
|
| replacing the lamp. The message functions will not operate properly if the lamp time is not | |
|
| reset correctly. | |
| • | Before replacing the lamp, carefully read the descriptions of "Lamp", "Lamp Life" and | |
|
| "Replacing the Lamp". | |
|
| ||
FILTER TIME | Refer to Filter Time: The starting of this item displays the time that the | ||
| Reset Filter Time [Use this function only when the filter is replaced!] : Pres the RESET | ||
| button for 3 seconds or more during the display of the filter time. Then the menu for reseting the | ||
| filter time will | display. When you have replaced the filter, select the RESET on the menu with the | |
|
| button. |
|
| • | Do not reset the filter time without replacing the filter. Reset the filter time always when | |
|
| replacing the filter. The message functions will not operate properly if the filter time is not reset | |
|
| correctly. |
|
| • | Before replacing the air filter, carefully read the descriptions of | |
|
| Filter" on page 20. | |
17 ViewSonic PJ501/PJ551