Only one speaker seems to be playing | Classe Audio SSP-300 specification

Classe Audio SSP-300 owner manual Only one speaker seems to be playing

Important!

✓Check the manual levels setting within the associated position, at system setup/speakers/(applicable position)/manual levels/(select the channel) and then use the increase or decrease buttons to adjust the channel in question

✓If none of these solutions work, please consult your Classé dealer for assistance. Never attempt to replace an internal fuse. There are no user-serviceable parts inside your unit.

3.Only one speaker seems to be playing.

✓Does the problem occur with all inputs? If so, check the interconnect cables between the preamp and the power amp. If no fault is found there, check the speaker wires for secure connections.

Be certain that the power ampliﬁer is off before checking any connections between the surround processor and power ampliﬁer, or between the speakers and the power ampliﬁer.

✓If the problem occurs only with a particular input, check the input balance control setting of that particular input:

menu a system setup a input a input name a balance where input name is the particular input in question.

✓If the input balance appears to be correct, check the interconnect cables between the corresponding source component and the SSP-300.

4.The IR remote control seems not to function.

✓Ensure that there are no obstacles between the IR remote and the IR sensor (located to the right of the Mute button).

✓If the batteries are weak, replace them with fresh ones.

5.There is a hum coming out of the speakers.

✓If you are running single-ended interconnects, make sure they are not running alongside any AC power cords.

✓If you are running single-ended interconnects, make sure they are not too long. Long runs of single-ended interconnects have a natural tendency to pick up noise even if they are shielded.

✓If any source components connected to your surround processor has a cable TV hooked up to it, try disconnecting the cable television line from the source. If the hum goes away, you will need an isolation device between your cable and that particular source. Refer to your Classé dealer for one of these inexpensive devices.

✓If the hum exists only on the phono input, make sure the turntable/tonearm assembly is not too close to other components. There should be at least 12 inches (30cm) clearance from the other components. The more clearance you provide, the better (as long as the tonearm cable is not stretching).

✓Make sure the tonearm cable is not touching or running alongside an AC cable.

✓Make sure you have the proper loading for your phono cartridge. If you are in doubt, consult your authorized Classé dealer.

SSP-300 specifications

The Classe Audio SSP-300 is a high-performance surround sound processor designed to cater to audiophiles and home theater enthusiasts alike. This unit seamlessly blends cutting-edge technology with an elegant design, ensuring both aesthetic appeal and superior audio performance.

One of the standout features of the SSP-300 is its advanced Digital Signal Processing (DSP) capabilities. Utilizing state-of-the-art technology, it offers precise sound manipulation and customizable audio settings that amplify the listening experience. The processor supports high-resolution audio formats, ensuring clear and detailed sound reproduction across sources.

The SSP-300 incorporates Classe’s proprietary text-to-speech algorithms, enhancing its ability to deliver music and dialogue with exceptional clarity. It is compatible with various surround sound formats, including Dolby Atmos and DTS:X, enabling immersive three-dimensional audio that envelops the listener. This feature makes it an ideal choice for movie buffs and gamers who seek realistic soundscapes in their entertainment.

Another defining characteristic of the Classe Audio SSP-300 is its exceptional connectivity options. It boasts multiple HDMI inputs and outputs, along with balanced and unbalanced audio connections. This versatility allows users to integrate various devices seamlessly, whether it's a Blu-ray player, gaming console, or streaming device. The SSP-300 also features RS-232 and Ethernet connectivity, facilitating simple integration into complex home automation systems.

The unit’s user-friendly interface is another highlight. The highly intuitive graphical user interface, accompanied by a full-color display, provides easy navigation through both setup and operation. Customization options allow users to save different sound profiles, catering to various content types and personal preferences.

The build quality of the Classe Audio SSP-300 exemplifies luxury, with a solid chassis that minimizes resonance and vibration, further enhancing audio fidelity. The elegant front panel, featuring tactile buttons, evinces both modernity and classical aesthetics fitting for high-end installations.

In conclusion, the Classe Audio SSP-300 is a sophisticated surround sound processor that excels in performance and versatility. With its robust feature set, advanced technologies, and commitment to audio excellence, it represents a pinnacle of modern audio engineering, making it a top choice for anyone looking to elevate their home entertainment experience.