Classe Audio SSP-300 owner manual Input setup

input setup

•high speed: determines the responsiveness of the control when the knob is being turned slowly. A setting of 0 will cause the volume to change as slowly as possible at high knob speeds; a setting of 100 will cause the volume to change as quickly as allowed at high knob speeds. (The menu is the same as the one above except for the indication that it is for the “high speed” adjustment.)

•speed limit: establishes a maximum rotary speed, beyond which there will be no change in volume whatsoever; the knob’s input will be ignored completely until it slows down below the speed limit.

•reset defaults: if after experimenting with various settings you decide you prefer it the way it operated as it came from the factory, pressing this button will restore the factory default settings. So feel free to experiment – you can always return to the original settings.

Each input on your surround processor can be customized in several ways to enhance either the performance or the ease of use of the system. A quick look at the input menu and submenus gives you an overview of what is possible:

The name button provides a way to customize the names of the inputs as displayed on the input selection screens. For example, you might want to name an input “CDP-100” for the Classé CD player you might have connected there. To do so, use the four buttons along the bottom of the Input Name menu to change the default name of any given input to something more specific to your system, as follows:

•The left button acts like the backspace key on a computer keyboard, moving the cursor to the left and eliminating any characters along the way.

•The right button moves the cursor to the right, adding characters

along the way. (Change each character to what you want as you go along, using the + and – buttons.)

45