ViewSonic PJ513DB warranty Display menu, Picture menu

DISPLAY menu

FUNCTION	DESCRIPTION (default setting/value)
(default setting/
value)
Aspect Ratio	There are four options to set the image's aspect ratio depending on
	your input signal source.
(Auto)	See "Selecting the aspect ratio" on page 21 for details.
Keystone	Corrects any keystoning of the image. See "Correcting keystone" on
(0)	page 20 for details.
Position	Displays the position adjustment page. To move the projected
	image, use the directional arrow buttons. The values shown on the

(0)lower position of the page change with every button press you made until they reach their maximum or minimum.

Phase	Adjusts the clock phase to reduce image
	distortion.
(depends on the
selected input
source)
H. Size	Adjusts the horizontal width of the image.
(depends on the
selected input
source)
Digital Zoom	Magnifies or reduces the projected image. See "Magnifying and
(100%)	searching for details on the projected picture" on page 20 for details.

PICTURE menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
Preset Mode	Pre-defined preset modes are provided so you can optimize your
(PC: Brightest;	projector image set-up to suit your program type. See "Selecting a
	preset mode" on page 22 for details.
YPbPr/ S-Video/
Video:
Standard)
Reference	Selects an preset mode that most suits your need for the image quality
	and further fine-tune the image based on the selections listed on the
Mode	same page below. See "Setting the User 1/User 2 mode" on page 23
	for details.
Brightness	Adjusts the brightness of the image.
	See "Adjusting Brightness" on page 23 for details.

ViewSonic 32 PJ513D/PJ513DB