ViewSonic PJ513DB warranty Temperature information, Indicators

Temperature information

When the Temperature warning light is on, it is warning you of the following possible problems:

1.The internal temperature is too high.

2.The fans are not working.

Turn the projector off and contact qualified service personnel for further help. For more detailed information, please refer to "Indicators" on page 42.

Indicators

Illustration

• Blank -: Light OFF				•	O: Orange light
•		: Light flashing		•	R: Red light
				•	G: Green light
•		: Light ON
Light				Status & Description
Power	Temp		Lamp

Power events

O	O	O	The projector has just been connected to a power outlet.
O	-	-	Stand-by mode.
G	-	-	Powering up.
G	-	-	Normal operation.

1.The projector needs 90 seconds to cool down as it was

	-	-		abnormally shut down without the normal cooling down
O				process. Or
			2.	The projector needs to cool for 90 seconds after the
				power is turned off.
	-	-	The projector has shutdown automatically. If you try to re-start
O			the projector, it will shutdown again. Please contact your
			dealer for assistance.

Lamp events

	-		The projector has shutdown automatically. If you try to re-start
O		R	the projector, it will shutdown again. Please contact your
			dealer for assistance.
-	-		1.	The projector needs 90 seconds to cool down. Or
		R	2.	Please contact your dealer for assistance.

ViewSonic 42 PJ513D/PJ513DB