ViewSonic ND4210w manual Vnc Client Management

Page 23

VNC CLIENT (MANAGEMENT)

VNC CLIENT (MANAGEMENT)

The VNC* client configuration screen shown below on the Management menu lets you set the device to start as a VNC client and connect automatically to the VNC server specified. This auto- start feature works only if the VNC client under System services is set to YES or Enabled.

VNC server password must be at least 6 characters (can be alpha-numeric).

X and Y coordinates let you set the size of the window of the remote desktop displayed if full screen is not desired.

VNC full screen mode lets you set the client to start up as full screen all the time.

VNC auto restart mode reconnects the client in the event of network interruption.

Delay before restart VNC sets the time between reconnects.

* You must have VNC software running on your computer Video/Audio Configuration

ViewSonic ND4210w

15

Downloaded From TV-Manual.com Manuals

Image 23

Contents Page This page left blank for dual-sided printing Product disposal at end of product life Product RegistrationViewSonic Corporation ViewSonic ND4210w Contents SETTING UP THE NETWORK DISPLAYINTRODUCTION MANAGEMENTHELP ADMINISTRATIONACTIONS APPENDIX ViewSonic ND4210w REQUIREMENTS PACKAGED CONTENTSOPTIONAL ACCESSORY INTRODUCTIONEthernet cable Switch or Router PC TWO MODES OF OPERATIONSTANDALONE TAS MANAGEDTWO MODES OF COMMUNICATION FEATURESVOL - lowers the volume MENU shows the IP address on the screen FRONT VIEWPOWER turns screen/ audio power off CH changes stream channel in development VOL + raises the volumeRESET button BACK VIEWPOWER button On/Standby Show IP REMOTE CONTROLSETTING UP THE NETWORK DISPLAY 1. CONNECT TO A SWITCH OR ROUTERBack view Connect Multiple Network Displays optionalspeaker 2. TURN POWER ON TO THE NETWORK DISPLAYConnect External Speakers optional Power Button4. LOGIN 3. PUT BATTERIES IN REMOTE CONTROLMANAGEMENT STARTUP URL/NETWORK CONFIGURATION4. If any changes were made to this screen, do the following BROWSER CONFIGURATION Page VNC CLIENT MANAGEMENT 1. Move the Brightness slider values range between -128 and TAS CONFIGURATION FTP SERVER SYSTEM SERVICES CONFIGURATION VIDEO UDP/RTP MULTICAST ACTIONSVIDEO HTTP 3. Click Start VIDEO IPTV1. Under Video, enter the IP Address and Port of the Video stream 2. Under Audio, enter the IP Address and Port of the Audio streamPress Start to start the video from the beginning VIDEO FILEPress Stop to end the video not Pause To create a playlist PLAYLISTVNC CLIENT ACTIONS OSD very transparent TRANSPARENCYOSD not transparent GO TO URL ADVANCED VIDEO CONFIGURATION ADMINISTRATIONSECURITY SAVE CONFIGURATION DEFAULT SETTINGS/RESET REBOOT FIRMWARE UPGRADE STATUS HELPLICENSE 2. In the Serial Number field, type the Serial Number click Apply SERIAL NUMBERABOUT MANAGEMENT APPENDIXSCREENS ACTIONS ADMINISTRATION HELP T = Telephone CUSTOMER SUPPORTCountry/Region WebsiteMERCURY WARNING COMPLIANCE AND SAFETY NOTICESFCC CLASS A COMPLIANCE NOTICE UNITED STATES GOST-R CERTIFICATION CANADIAN COMPLIANCE NOTICEFor EU-member states only as follows EUROPEAN COMPLIANCE NOTICECCC Class A Declaration FOR TAIWAN AND OTHER TRADITIONAL CHINESE MARKETSCHINA CCC MARK DECLARATION OF ROHS COMPLIANCE Important Safety Instructions DATA LOSS DISCLAIMER CLEANING THE DEVICECommunication SPECIFICATIONSNetwork AudioLIMITED WARRANTY

Related manuals

Manual 60 pages 7.69 Kb