ViewSonic ND4210w manual System Services Configuration

Page 27

SYSTEM SERVICES CONFIGURATION

SYSTEM SERVICES CONFIGURATION

Configure System Services in the MIB (Management Information Base) to manage the following groups: Network, Browser, Video/Audio, TAS, and System Services. Click Management > System services. The screen shown below appears.

1.In the Network Media Player (port 6666) field, select Yes to access the ND4210w using a Telnet client on port 6666. If you do not want this, select No.

2.In the MIB Event Notification field, select Yes to be notified of changes that you made to the ND4210w settings.

3.If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

ViewSonic ND4210w

19

Downloaded From TV-Manual.com Manuals

Image 27

Contents Page This page left blank for dual-sided printing Product Registration ViewSonic CorporationProduct disposal at end of product life ViewSonic ND4210w Contents SETTING UP THE NETWORK DISPLAYINTRODUCTION MANAGEMENTADMINISTRATION ACTIONSHELP APPENDIX ViewSonic ND4210w REQUIREMENTS PACKAGED CONTENTSOPTIONAL ACCESSORY INTRODUCTIONEthernet cable Switch or Router PC TWO MODES OF OPERATIONSTANDALONE TAS MANAGEDTWO MODES OF COMMUNICATION FEATURESVOL - lowers the volume MENU shows the IP address on the screen FRONT VIEWPOWER turns screen/ audio power off CH changes stream channel in development VOL + raises the volumeRESET button BACK VIEWPOWER button On/Standby Show IP REMOTE CONTROLSETTING UP THE NETWORK DISPLAY 1. CONNECT TO A SWITCH OR ROUTERBack view Connect Multiple Network Displays optionalspeaker 2. TURN POWER ON TO THE NETWORK DISPLAYConnect External Speakers optional Power Button4. LOGIN 3. PUT BATTERIES IN REMOTE CONTROLMANAGEMENT STARTUP URL/NETWORK CONFIGURATION4. If any changes were made to this screen, do the following BROWSER CONFIGURATION Page VNC CLIENT MANAGEMENT 1. Move the Brightness slider values range between -128 and TAS CONFIGURATION FTP SERVER SYSTEM SERVICES CONFIGURATION VIDEO UDP/RTP MULTICAST ACTIONSVIDEO HTTP 3. Click Start VIDEO IPTV1. Under Video, enter the IP Address and Port of the Video stream 2. Under Audio, enter the IP Address and Port of the Audio streamVIDEO FILE Press Stop to end the video not PausePress Start to start the video from the beginning To create a playlist PLAYLISTVNC CLIENT ACTIONS TRANSPARENCY OSD not transparentOSD very transparent GO TO URL ADVANCED VIDEO CONFIGURATION ADMINISTRATIONSECURITY SAVE CONFIGURATION DEFAULT SETTINGS/RESET REBOOT FIRMWARE UPGRADE STATUS HELPLICENSE 2. In the Serial Number field, type the Serial Number click Apply SERIAL NUMBERABOUT APPENDIX SCREENSMANAGEMENT ACTIONS ADMINISTRATION HELP T = Telephone CUSTOMER SUPPORTCountry/Region WebsiteCOMPLIANCE AND SAFETY NOTICES FCC CLASS A COMPLIANCE NOTICE UNITED STATESMERCURY WARNING GOST-R CERTIFICATION CANADIAN COMPLIANCE NOTICEFor EU-member states only as follows EUROPEAN COMPLIANCE NOTICEFOR TAIWAN AND OTHER TRADITIONAL CHINESE MARKETS CHINA CCC MARKCCC Class A Declaration DECLARATION OF ROHS COMPLIANCE Important Safety Instructions DATA LOSS DISCLAIMER CLEANING THE DEVICECommunication SPECIFICATIONSNetwork AudioLIMITED WARRANTY

Related manuals

Manual 60 pages 7.69 Kb