EnGenius Technologies EOA7530 manual Service IP Address, Connection ID, Enable Pptp pass through

Login	Specify the user name supplied by your ISP.
Password	Specify the password supplied by your ISP.
Service IP Address	Specify the service IP address supplied by your ISP.
Connection ID	Specify the connection ID supplied by your ISP.
MTU	Specify the Maximum Transmit Unit size. It is recommended you accept the default
	setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set
	too high or too low, which impacts network performance. In extreme cases, an MTU
	setting that is too low can prevent the EOA7530 from establishing some connections.
Type	Select a connection type from the drop‐down menu. Choices are:
	•	Keep Connection = device connects to the Internet automatically.
	•	Automatic Connection = device connects to the Internet automatically when the
		traffic goes through the Internet and disconnects after a period of idle time
		elapses.
	•	Manual Connection = device connects to the Internet manually.
Idle Timeout	If the EOA7530 is configured for Automatic Connection, specify the maximum
	amount of time the device can remain idle before disconnecting.
Enable PPTP pass through	Check PPTP pass through on VPN Connection. Otherwise, the EOA7530 will not be
on VPN Connection	able to connect to the Internet via PPTP.
Enable IPSec pass through	Check IPSec pass through on VPN Connection. Otherwise, the EOA7530 will not be
on VPN Connection	able to transmit data using the IPSec protocol.
Enable L2TP pass through	Check L2TP pass through on VPN Connection. Otherwise, the EOA7530 will not be
on VPN Connection	able to connect to the Internet using L2TP.
Apply / Cancel	Click Apply to apply the changes or Cancel to discard your changes and return to the
	previous settings.
		54