EnGenius Technologies EOA7530 manual PPPoE Point‐to‐Point Protocol over Ethernet, Mtu

Apply / Cancel	Click Apply to apply the changes or Cancel to discard your changes and return to the
	previous settings.

7.3 PPPoE (Point‐to‐Point Protocol over Ethernet)

Select Point to Point Protocol over Ethernet (PPPoE) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Remove your PPPoE software from your computer, as it is not needed and will not work with your EOA7530.

Login	Specify the user name supplied by your ISP.
Password	Specify the password supplied by your ISP.
Service Name	Specify the service name supplied by your ISP.
MTU	Specify the Maximum Transmit Unit size. It is recommended you accept the default
	setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set
	too high or too low, which impacts network performance. In extreme cases, an MTU
	setting that is too low can prevent the EOA7530 from establishing some connections.
Authentication Type	Select the algorithm used for authentication. Choices are PAP, CHAP, or Auto.
	Default is Auto.
Type	Select a connection type from the drop‐down menu. Choices are:
	•	Keep Connection = device connects to the Internet automatically.
	•	Automatic Connection = device connects to the Internet automatically when the
		traffic goes through the Internet and disconnects after a period of idle time
		elapses.
	•	Manual Connection = device connects to the Internet manually.
Idle Timeout	If the EOA7530 is configured for Automatic Connection, specify the maximum
	amount of time the device can remain idle before disconnecting.
Apply / Cancel	Click Apply to apply the changes or Cancel to discard your changes and return to the

52