Eiki LC-NB3S owner manual Preparation Positioning Projector, Adjustable Feet

PREPARATION

POSITIONING PROJECTOR

●This projector is designed to project on a flat projection surface.

● The projector can be focused from 3.0’(0.9m) ~ 22.6’(6.9m).				ROOM LIGHT
● Refer to the figure below to adjust a screen size.				The brightness in a room has a great influence on
				picture quality. It is recommended to limit
				ambient lighting in order to provide the best
				image.
					22.6’	(6.9m)
				15.1’ (4.6m)		300”
		11.2’ (3.4m)			Max. Zoom
		7.5’ (2.3m)		200”		249”
			150”		Min. Zoom		H1
	3.0’ (0.9m)
				167”
		100”
			124”
	40”	84”
	34”						H2
Screen Size	34”	40”	100”	150”	200”		300”
(W x H) mm	690.9 x 518.2	812.8 x 609.6	2032 x 1524	3048 x 2286	4064 x 3048	6096 x 4572
Height (H1)	18.4”(466.38mm)	21.6”(548.64mm) 54”(1371.6mm)		81”(2057.4mm)	108”(2743.2mm)	162”(4114.8mm)
Height (H2)	2.0”(51.82mm)	2.4”(60.96mm)	6”(152.4mm)	9”(228.6mm)	12”(304.8mm)	18”(457.2mm)

ADJUSTABLE FEET

Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6 degrees.

1	Lift the front of the projector and pull FEET LOCK LATCHES
	on the both sides of the projector.
2	Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
	and rotate ADJUSTABLE FEET to adjust the position and tilt.
3	To retract ADJUSTABLE FEET, lift the front of the projector
	and pull and undo FEET LOCK LATCHES.

Keystone distortion of the projected image can be adjusted by Menu Operation. (Refer to P20 and 35.)

CAUTION

		FEET LOCK
Avoid positioning a projector with the angle of more than 20	ADJUSTABLE FEET	LATCHES
degrees. Projection Lamp may malfunction.

9