Eiki LC-HDT10 instruction manual Operating ON-SCREEN Menu, HOW to Operate ON-SCREEN Menu

BEFORE OPERATION

OPERATING ON-SCREEN MENU

HOW TO OPERATE ON-SCREEN MENU

You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on

ON-SCREEN MENU.

1 DISPLAY MENU

Press MENU button to display ON-SCREEN MENU.

2 MOVING POINTER

Move pointer (✽ see below) or adjust value of item by pressing POINT button(s) on Side Control or on Remote Control Unit.

✽Pointer is a icon on ON-SCREEN MENU to select item. See fig- ures on section "FLOW OF ON-SCREEN MENU OPERATION" below.

3 SELECT ITEM

Select item or set selected function by pressing SELECT button.

WIRELESS REMOTE CONTROL

▲	MENU BUTTON
	POINT BUTTON
	Used to move Pointer
SELECT	UP/ DOWN/ RIGHT/
	LEFT.

		SELECT BUTTON
		Used to select item.
SIDE CONTROL
MENU	LENS SHIFT I	MENU BUTTON
SELECT	I	POINT BUTTONS
		Used to move Pointer
		UP/ DOWN/ RIGHT/
		LEFT.
		SELECT BUTTON
		Used to select item.
AUTO PC ADJUST	IMAGE

FLOW OF ON-SCREEN MENU OPERATION

	MENU BAR	MENU ICON
Display ON-SCREEN MENU

1Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER.

Select Menu to be adjusted

2Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons.

Control or adjust item through ON-SCREEN MENU

3Press POINT UP/DOWN button and move POINTER (red frame or red arrow) to ITEM that you want to adjust, and then press SELECT button to show ITEM DATA.

4Adjust ITEM DATA by pressing POINT RIGHT / LEFT buttons.

Refer to following pages for details of respective adjustments.

POINTER

POINTER (red frame)(red frame) Press POINT DOWN button to

move POINTER.

ITEM

SELECT

BUTTON

ITEM DATA

Press POINT LEFT/RIGHT buttons to adjust value or set function.

20