Eiki LC-HDT10 instruction manual Display Adjust Image Level Adjustments

Page 33

DISPLAY ADJUST

IMAGE LEVEL ADJUSTMENTS

1Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon.

2Press POINT UP/DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).

Contrast

Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.)

IMAGE ADJUST MENU

IMAGE ADJUST Menu icon

Move a red frame pointer to item to be selected and then press SELECT button.

Brightness

Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.)

Color

Press POINT LEFT button to lighten color, and POINT RIGHT button to deeper color. (From 0 to 63.)

Tint

Press POINT LEFT button or POINT RIGHT button to obtain proper color. (From 0 to 63.)

Color temp.

Press either POINT LEFT button or POINT RIGHT button to Color temp. level that you want to select. (XLow, Low, Mid or High)

White balance (Red)

Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

White balance (Green)

Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

White balance (Blue)

Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

Sharpness

Press POINT LEFT button to soften the image, and POINT RIGHT button to sharpen the image. (From 0 to 15.)

Detail enhancer

Press either POINT LEFT button or POINT RIGHT button to enhance the detail of the image. (From 0 to 15.)

Gamma

Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.)

Press POINT LEFT/RIGHT buttons to adjust value.

Press SELECT button at this icon to display next items.

Press SELECT button at this icon to display previous items.

Press POINT LEFT/RIGHT buttons to adjust value.

Press SELECT button at this icon to display next items.

33

Image 33
Contents Multimedia Projector Model LC-HDT10To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Computers Features and DesignColor Systems Component VideoName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe 200 240 V ACPreparation Lens Installation Lens Shift AdjustmentPositioning Projector Moving Projector Preparation Picture Level and Tilt AdjustmentConnecting Projector Replacement of TerminalTerminals of Projector Input 2 Connecting Projector INPUT/OUTPUT Terminals and Jacks InputSerial Port Terminal Connecting ProjectorTerminals Projector Connecting to ComputerVideo Source example Side Controls and Indicators Before OperationSide Controls Front Indicators Indicators1WIRED Remote Jack Operation of Remote ControlRemote Control Code Change and Operating Range HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation System BOX Before Operation Menu BARTurning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorZoom Adjustment Adjusting ScreenFocus Adjustment Picture Freeze FunctionDirect Operation Sound AdjustmentMenu Operation Sound MenuPb/Cb, Pr/Cr Selecting Input SourceRGBAnalog RGBScartAutomatic MULTI-SCAN System System SelectAuto System MenuAuto Basic Operation Select Video SystemSystem Select Menu SDI System Select Menu Component videoDisplay Adjustments Display AdjustScreen Adjustments Screen Adjustment DirectAuto PC Adj Display Adjust Auto PC Adjustment Display Adjust Manual Display Adjustments Clamp Current modeImage Adjust Menu Image AdjustmentsImage Level Select Direct Image Level Select MenuDisplay Adjust Image Level Adjustments Progressive scan Noise reductionAuto picture control Auto lamp controlSetting Setting MenuSetting Menu Logo Menu positionCeiling RearPower management To change the code of the Remote Control UnitRemote control To change the code of ProjectorFactory default Lamp counter resetKey lock QuitAIR Filter Care and Cleaning MaintenanceIndicator AppendixYellow Lamp Dim Lamp Red Lamp Appendix Lamp ManagementLamp Status Mark on LampFront Indicators Rear Indicators Appendix Lamp ReplacementOrder Replacement Lamp Cleaning Projection LensTroubleshooting Service Remote Control UnitDoes not work Appendix Indicators and Projector Condition Indicators Projector ConditionInput System Appendix Menu TreeImage adjust Technical Specifications Pin Configuration Appendix Configurations of TerminalsResolution Appendix Compatible Computer SpecificationsHDB 15 pin-SCART 21 pin Cable Type No Optional PartsTerminal Board Y/C Type No Terminal Board Faroudja Type NoKey to better communications Canada
Related manuals
Manual 52 pages 12.47 Kb