Eiki LC-XG250L Computer System Selection, Selecting Computer System Manually, PC System Menu

Computer Adjustment

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 75–76.)

One of the following messages may appear when:

Auto	The projector cannot recognize the connected
	signal conforming to the provided PC Systems.
	The “Auto” is displayed on the System Menu
	box and the Auto PC Adjustment function works
	to display proper images. If the image is not
	projected properly, a manual adjustment is
	required (pp.40–41).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 69.)

Mode 1	The preset system is manually adjusted in the
	PC Adjust Menu. The adjusted data can be
	stored in Mode 1–10 (pp.40–41).
	PC Systems provided in this projector is chosen.
SVGA 1
	The projector chooses a proper system provided
	in the projector and displays it.

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	frame pointer to the PC System Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to the desired system and then press the

SELECT button.

PC System Menu

The PC System Menu icon Selected system is displayed.

Systems in this dialog box can be selected.

Custom Mode (1–10) set in the

PC Adjust Menu (pp.40–41).

38