Eiki LC-XG250L, LC-XG300L owner manual Image Mode Selection, Image Menu

Page 44

Image Mode Selection

Image Mode Selection

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	frame pointer to the Image Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to the desired image mode and then press the

SELECT button.

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture mode preset on the projector.

Real

Picture mode with improved halftone for graphics.

(This icon is displayed with the computer signal.)

Cinema

Picture mode adjusted with fine tone.

(This icon is displayed with the video signal.)

Image 1–4

For viewing with the user preset image mode in the Image Adjust Menu (see page 48). This Image memory is provided in each computer, component, and video input source.

Image Menu	Image Menu icon
Image Menu

Move the red frame pointer to the desired image mode and press the SELECT button.

This will change to Cinema mode icon with the video signal input.

The selected image mode is check marked.

44

Image 44

Contents Model LC-XG300/LC-XG250 LC-XG300L*/LC-XG250L Features and Design Compact Design Power ManagementTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorAC Power Cord for the United States and Canada ComplianceAdjustable Feet 0Exhaust Vent Part Names and FunctionsFront Back Bottom Infrared Remote Receiver FrontRear Terminal Reset button 4Infrared Remote Receiver BackTop Control Remote Control Wired Remote jack3MENU button Spotlight Pointer Laser Pointer FunctionPointer Function Wireless Mouse Operation Remote Control CodeAdjustable Feet Remote Control Battery InstallationRemote Control Receivers and Operating Range Installation Lens InstallationAttaching the lens to the projector Removing the lensPositioning the Projector for LC-XG300/XG250 Moving the LensConnecting the AC Power Cord Projector side AC Outlet sideConnecting to a Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Video, S-Video Connecting to Video Equipment Component and RGB Scart Basic Operation Turning On the ProjectorSelected Input Source and Lamp Control PIN Code Input Dialog BoxTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Information Operating with Projector ControlLens Operation Menu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonNo Show button Input Selection Remote Control Operation Remote Control button operationInput Top Control OperationInput Source Selection Input MenuRGB PC analog RGB PC Scart RGB PC digital Video ComponentVideo System Selection Video or S-VideoComponent AV System Menu Video or S-VideoComputer Adjustment Helpful HintsPC System Menu Computer System SelectionSelecting Computer System Manually Auto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataMemo Image Mode Selection Image Mode Selection Image MenuImage Adjustment Image Adjustment Image Adjust MenuSharpness GammaNoise reduction ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Keystone Screen AdjustmentScreen Menu Screen Size Adjustment Computer Signals Screen Size Adjustment Video, Component Signals Setting Pointer SettingSetting Menu Language Logo Logo and Logo PIN code lock settings Logo CaptureLogo select CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Logo PIN code lockRemote control Display On start Power managementPower management Fan control Key lockPIN code lock Change the PIN code lock settingEnter a PIN code Lamp counter Change the PIN codeTest pattern Factory default Factory defaultFilter counter Filter counterMaintenance and Filter Cleaning RecommendationPage Lamp Replacement Reset the lamp counterResetting the Lamp Counter Lamp counterProjector is shut down and all five indicators are blinking Then check the matters belowCleaning the Projection Lens Cleaning the Projector CabinetTroubleshooting AppendixAppendix Information Input Menu TreeInput PC Adjust Screen SettingIndicators and Projector Condition Projector ConditionLamp Replace indicator After resetting the counterCompatible Computer Specifications ON-SCREEN Resolution31.47 59.94 Panel Resolution Signal CompatibilityPower Mechanical InformationAccessories Optional PartsPJ Link Notice Configurations of Terminals USB Connector Series BTerminal Analog RGB Mini D-sub 15 pin Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoDimensions Key to better communications Canada