Classe Audio CA-5100 owner manual Front Panel, Standby button & LED indicator

Page 11

 

 

BALANCED

 

 

1

2

3

4

5

SELECT

 

 

 

MODE

 

 

SINGLE-ENDED

 

 

 

 

#!

 

 

Front Panel

1Standby button & LED indicator

The front panel Standby button will toggle the amplifier between operate, its fully operational state, and a standby mode that leaves the amplifier off, yet ready to respond to system commands via any of the supported control options (e.g. IR input, DC trigger, CAN-Bus, or RS-232).

The current state of the amplifier is indicated by the LED indicator in the center of the Standby button. The state of this LED indicates the following:

•

on

=

standby

•

flashing (on power-up)

=

initialization

• off + Channel LED on

=

operate

•

flashing (after power-up)

=

AC mains voltage out of range

When in standby, the amplifier’s gain stages are powered down. Only a small power supply and control circuit remain on, consuming relatively little power. Fortunately, since the output stages by their nature conduct a great deal of current, they warm up and sound their best very quickly.

If you are not going to use the amplifier for an extended period of time, perhaps while traveling for a vacation, we suggest you disconnect it from the AC mains. Please be certain that the amplifier is in standby prior to disconnecting it from the AC mains.

Also, it is a good practice to physically disconnect any and all valuable electronics from the AC mains during electrical storms, as a lightning strike anywhere near your home can put a tremendous surge on the AC

mains that can easily damage any piece of electronics, no matter how well designed and protected. The best protection in the case of severe electrical storms is to simply remove the electronics from any connection with the power grid.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CA-5100 Power Amplifier Page Important Safety Instructions Contents Welcome to the Classé family Word about installationUnpacking and Placement Serial number Register your purchase Operating voltage Warm up/break-in period Please read this manual… Extensive listening tests Special Design FeaturesExtraordinary longevity Robust protection Front Panel Standby button & LED indicatorSelect button Channel status LED indicatorsMode button Balanced XLR Input Rear PanelSpeaker Outputs Single-Ended RCA InputDC Trigger Input and Output Classé CAN-Bus Control PortsIR Input and Output AC Mains Fuse RS-232 Control PortAC Mains Input Configure your amplifier Initial SetupConfiguring balanced/ single-ended operation Make your speaker connections Configuring amplifier turn-on delay/amp noMake your preamp connections Double-check all your connections FeaturesCAN-Bus CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus Configuration Operate AC status Status Name CAN-Bus shared featuresPlayLink Global brightness Global standbyAmp info Event log Care and Maintenance Amplifier keeps shutting off TroubleshootingNo sound, and no Channel LED is lit No sound, and one or more Channel LEDs is blinking redPage Specifications Dimensions Asia 852 2790 Email classe@bwgroup.hk
Related manuals
Manual 180 pages 23.42 Kb

CA-5100 specifications

The Classe Audio CA-5100 is a high-performance power amplifier designed to deliver exceptional sound quality and reliability for audiophiles and music enthusiasts. Renowned for its robust build and superior audio performance, the CA-5100 is part of Classe's tenured lineage of premium audio equipment, making it a standout choice for both hi-fi home systems and professional audio setups.

One of the main features of the CA-5100 is its power output. With a total output of 100 watts per channel into 8 ohms, this amplifier can drive a wide range of speakers, making it versatile for various audio environments. When operating at 4 ohms, the power output rises to an impressive 200 watts per channel, ensuring that it can handle demanding speaker loads without compromising sound quality.

The CA-5100 employs Class A/B amplification design, which is known for its balance between sound fidelity and efficiency. This technology allows for low distortion and high power efficiency, resulting in a warm and natural sound that audiophiles crave. The dual-mono architecture of the amplifier ensures that each channel operates independently, providing excellent channel separation and reducing crosstalk for a more immersive listening experience.

One of the notable characteristics of the Classe Audio CA-5100 is its premium construction. It features a heavy-duty chassis that minimizes vibrations and interferences, allowing for cleaner signal transmission. Additionally, high-quality components, such as oversized transformers and large filter capacitors, contribute to its high current delivery capability, ensuring robust performance even at high volumes.

The amplifier is equipped with proprietary technologies, including advanced thermal management systems, which dissipate heat effectively to maintain optimal performance and longevity. The CA-5100 also includes various input options to accommodate different audio sources, such as balanced XLR and unbalanced RCA inputs, ensuring compatibility with a wide range of audio devices.

In conclusion, the Classe Audio CA-5100 embodies high-end audio engineering principles, offering exceptional sound reproduction, robust power handling, and a build quality that reflects Classe's commitment to excellence. Whether used in a dedicated listening room or as part of a professional audio system, the CA-5100 stands as a testament to what high-performance amplifiers can achieve, delivering an unforgettable auditory experience for any listener.
Top Page Image Contents