Initial Setup, Configure your amplifier

Important:

configuring balanced/ single-ended operation

Initial Setup

Your new Classé ampliﬁer is quite simple to set up and enjoy. Please follow the steps outlined below in order to safely set up and use your new ampliﬁer.

The AC mains connection should be the last connection you make on your new power amplifier. In addition, it is always a good idea to power up your power amplifier(s) last, after everything else has been powered up and has stabilized.

Conversely, it is good practice to power the amplifier(s) down first when shutting down the system, as this prevents any transients from other components from getting through to your loudspeakers.

1.Unpack everything according to the included instructions.

Be careful when doing so, as this ampliﬁer is quite heavy.

2.Place your amplifier (be sure to read “Unpacking and Placement”) and connect it to the AC mains.

This includes deciding on the location, making sure you have adequate ventilation, and adequate clearance for all the wires behind the ampliﬁer. Once accomplished, connect the ampliﬁer directly to the AC mains. Do not use extension cords, as most are not suitable for the current sometimes required by your ampliﬁer.

3.Configure your amplifier.

The Select and Mode buttons are used when conﬁguring your ampliﬁer for how you would like it to operate.

While in standby, pressing the Select button will cause the Channel LEDs to light up, indicating how the ampliﬁer is currently conﬁgured (either balanced or single-ended) for each channel.

One of the Channel LED indicators will be blinking, indicating that you may select either balanced or single-ended operation for that channel. Press the Mode button to toggle between either the balanced mode or the single- ended mode of operation, as indicated by which of the two channel LEDs for that channel is blinking.

Press the Select button again to select the next channel, and repeat the pro- cess until the ampliﬁer is conﬁgured as you desire. To ﬁnish, continue to press and release the Select button until all the Channel LEDs are oﬀ.

Make sure you conﬁgure the ampliﬁer to use the type of input connection you will be using for each channel. You may safely use any combination of single-ended and balanced input connections your system requires.

CA-5100 specifications

The Classe Audio CA-5100 is a high-performance power amplifier designed to deliver exceptional sound quality and reliability for audiophiles and music enthusiasts. Renowned for its robust build and superior audio performance, the CA-5100 is part of Classe's tenured lineage of premium audio equipment, making it a standout choice for both hi-fi home systems and professional audio setups.

One of the main features of the CA-5100 is its power output. With a total output of 100 watts per channel into 8 ohms, this amplifier can drive a wide range of speakers, making it versatile for various audio environments. When operating at 4 ohms, the power output rises to an impressive 200 watts per channel, ensuring that it can handle demanding speaker loads without compromising sound quality.

The CA-5100 employs Class A/B amplification design, which is known for its balance between sound fidelity and efficiency. This technology allows for low distortion and high power efficiency, resulting in a warm and natural sound that audiophiles crave. The dual-mono architecture of the amplifier ensures that each channel operates independently, providing excellent channel separation and reducing crosstalk for a more immersive listening experience.

One of the notable characteristics of the Classe Audio CA-5100 is its premium construction. It features a heavy-duty chassis that minimizes vibrations and interferences, allowing for cleaner signal transmission. Additionally, high-quality components, such as oversized transformers and large filter capacitors, contribute to its high current delivery capability, ensuring robust performance even at high volumes.

The amplifier is equipped with proprietary technologies, including advanced thermal management systems, which dissipate heat effectively to maintain optimal performance and longevity. The CA-5100 also includes various input options to accommodate different audio sources, such as balanced XLR and unbalanced RCA inputs, ensuring compatibility with a wide range of audio devices.

In conclusion, the Classe Audio CA-5100 embodies high-end audio engineering principles, offering exceptional sound reproduction, robust power handling, and a build quality that reflects Classe's commitment to excellence. Whether used in a dedicated listening room or as part of a professional audio system, the CA-5100 stands as a testament to what high-performance amplifiers can achieve, delivering an unforgettable auditory experience for any listener.