Classe Audio CA-5100 owner manual Specifications

Page 28

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to adjust specifications without notice.

„

Power output

100W/ch continuous rms @ 8Ω

 

(all channels driven)

190W/ch continuous rms @ 4Ω

„

Frequency response

 

10Hz – 22kHz (+0/-0.1dB)

 

Phase

 

10Hz – 155kHz (+0/-3.0dB)

„

 

better than -10° @ 22kHz

„

Signal-to-noise ratio

 

 

105dB

 

Channel separation

(ref. full ouput, 10Hz – 80kHz)

„

 

better than 80dB @ 20kHz

„

Noise floor (FFT)

 

all peaks less than -95dBV

 

 

 

(10Hz – 80kHz)

„

Distortion (THD + noise)

 

0.003% @ 8Ω

 

(unweighted, 0.8Vrms/1kHz input, 10Hz – 500kHz)

„

Voltage gain

 

 

29.1dB

„

Sensitivity

1.0Vrms for rated output @ 8Ω

„

Input Impedance

 

 

100kΩ

„

Rated power consumption (as per IEC60065 para. 2.3.10)

575W

„

Idle power consumption

 

 

204W

„

Mains voltage

 

specified on rear panel

 

 

(cannot be changed by dealer or user).

„

Dimensions (not incl. controls or connectors)

Width: 17.5” (445mm)

 

 

 

Height: 6.75” (171mm)

 

Shipping weight

 

Depth: 18.5” (470mm)

„

 

88 lbs (40kg)

„

Net weight

 

75 lbs (34kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

Internet:

http://www.classeaudio.com

email:

cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

28

Image 28
Contents CA-5100 Power Amplifier Page Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Serial number Register your purchase Operating voltage Warm up/break-in period Please read this manual… Special Design Features Extensive listening testsExtraordinary longevity Robust protection Standby button & LED indicator Front PanelMode button Channel status LED indicatorsSelect button Rear Panel Balanced XLR InputSingle-Ended RCA Input Speaker OutputsIR Input and Output Classé CAN-Bus Control PortsDC Trigger Input and Output AC Mains Input RS-232 Control PortAC Mains Fuse Configuring balanced/ single-ended operation Initial SetupConfigure your amplifier Make your preamp connections Configuring amplifier turn-on delay/amp noMake your speaker connections CAN-Bus FeaturesDouble-check all your connections Hardware setup Classé Delta Series ProductsCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status NameGlobal brightness Global standby PlayLinkAmp info Event log Care and Maintenance Troubleshooting No sound, and no Channel LED is litNo sound, and one or more Channel LEDs is blinking red Amplifier keeps shutting offPage Specifications Dimensions Asia 852 2790 Email classe@bwgroup.hk
Related manuals
Manual 180 pages 23.42 Kb

CA-5100 specifications

The Classe Audio CA-5100 is a high-performance power amplifier designed to deliver exceptional sound quality and reliability for audiophiles and music enthusiasts. Renowned for its robust build and superior audio performance, the CA-5100 is part of Classe's tenured lineage of premium audio equipment, making it a standout choice for both hi-fi home systems and professional audio setups.

One of the main features of the CA-5100 is its power output. With a total output of 100 watts per channel into 8 ohms, this amplifier can drive a wide range of speakers, making it versatile for various audio environments. When operating at 4 ohms, the power output rises to an impressive 200 watts per channel, ensuring that it can handle demanding speaker loads without compromising sound quality.

The CA-5100 employs Class A/B amplification design, which is known for its balance between sound fidelity and efficiency. This technology allows for low distortion and high power efficiency, resulting in a warm and natural sound that audiophiles crave. The dual-mono architecture of the amplifier ensures that each channel operates independently, providing excellent channel separation and reducing crosstalk for a more immersive listening experience.

One of the notable characteristics of the Classe Audio CA-5100 is its premium construction. It features a heavy-duty chassis that minimizes vibrations and interferences, allowing for cleaner signal transmission. Additionally, high-quality components, such as oversized transformers and large filter capacitors, contribute to its high current delivery capability, ensuring robust performance even at high volumes.

The amplifier is equipped with proprietary technologies, including advanced thermal management systems, which dissipate heat effectively to maintain optimal performance and longevity. The CA-5100 also includes various input options to accommodate different audio sources, such as balanced XLR and unbalanced RCA inputs, ensuring compatibility with a wide range of audio devices.

In conclusion, the Classe Audio CA-5100 embodies high-end audio engineering principles, offering exceptional sound reproduction, robust power handling, and a build quality that reflects Classe's commitment to excellence. Whether used in a dedicated listening room or as part of a professional audio system, the CA-5100 stands as a testament to what high-performance amplifiers can achieve, delivering an unforgettable auditory experience for any listener.