Classe Audio CA-5100 owner manual

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

NOTICE

All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark.

This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on our web site at http://www.classeaudio.com.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Classé products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Please record the serial number for your new Classé component here for future reference.

Serial #: ____________________________________________

2

Image 2
Contents CA-5100 Power Amplifier Page Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Serial number Register your purchase Operating voltage Warm up/break-in period Please read this manual… Special Design Features Extensive listening testsExtraordinary longevity Robust protection Standby button & LED indicator Front PanelSelect button Channel status LED indicatorsMode button Rear Panel Balanced XLR InputSingle-Ended RCA Input Speaker OutputsDC Trigger Input and Output Classé CAN-Bus Control PortsIR Input and Output AC Mains Fuse RS-232 Control PortAC Mains Input Configure your amplifier Initial SetupConfiguring balanced/ single-ended operation Make your speaker connections Configuring amplifier turn-on delay/amp noMake your preamp connections Double-check all your connections FeaturesCAN-Bus Category 5 Network Cables Hardware setupClassé Delta Series Products CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status NameGlobal brightness Global standby PlayLinkAmp info Event log Care and Maintenance No sound, and one or more Channel LEDs is blinking red TroubleshootingNo sound, and no Channel LED is lit Amplifier keeps shutting offPage Specifications Dimensions Asia 852 2790 Email classe@bwgroup.hk
Related manuals
Manual 180 pages 23.42 Kb

CA-5100 specifications

The Classe Audio CA-5100 is a high-performance power amplifier designed to deliver exceptional sound quality and reliability for audiophiles and music enthusiasts. Renowned for its robust build and superior audio performance, the CA-5100 is part of Classe's tenured lineage of premium audio equipment, making it a standout choice for both hi-fi home systems and professional audio setups.

One of the main features of the CA-5100 is its power output. With a total output of 100 watts per channel into 8 ohms, this amplifier can drive a wide range of speakers, making it versatile for various audio environments. When operating at 4 ohms, the power output rises to an impressive 200 watts per channel, ensuring that it can handle demanding speaker loads without compromising sound quality.

The CA-5100 employs Class A/B amplification design, which is known for its balance between sound fidelity and efficiency. This technology allows for low distortion and high power efficiency, resulting in a warm and natural sound that audiophiles crave. The dual-mono architecture of the amplifier ensures that each channel operates independently, providing excellent channel separation and reducing crosstalk for a more immersive listening experience.

One of the notable characteristics of the Classe Audio CA-5100 is its premium construction. It features a heavy-duty chassis that minimizes vibrations and interferences, allowing for cleaner signal transmission. Additionally, high-quality components, such as oversized transformers and large filter capacitors, contribute to its high current delivery capability, ensuring robust performance even at high volumes.

The amplifier is equipped with proprietary technologies, including advanced thermal management systems, which dissipate heat effectively to maintain optimal performance and longevity. The CA-5100 also includes various input options to accommodate different audio sources, such as balanced XLR and unbalanced RCA inputs, ensuring compatibility with a wide range of audio devices.

In conclusion, the Classe Audio CA-5100 embodies high-end audio engineering principles, offering exceptional sound reproduction, robust power handling, and a build quality that reflects Classe's commitment to excellence. Whether used in a dedicated listening room or as part of a professional audio system, the CA-5100 stands as a testament to what high-performance amplifiers can achieve, delivering an unforgettable auditory experience for any listener.