Eiki LC-XB26, LC-XB21 owner manual Computer System Selection, Auto, Mode, PC System Menu

Page 28

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 59 )

✔Note:

The projector may display one of the following messages.

Auto	When the projector cannot recognize connected
	signal conforming to PC Systems provided in this
	signal conforming to PC Systems provided in this
	projector, Auto PC Adjustment function works to
	display proper images and the message “Auto” is
	displayed on the PC System menu box. When the
	image is not projected properly, manual adjustment is
	required. (p30, 31)

-----There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54)

Mode 1	User preset system manually adjusted in PC Adjust
	menu. Adjustment data can be stored in Mode 1 - 5.
	menu. Adjustment data can be stored in Mode 1 - 5.
	(p30, 31)
	PC Systems provided in the projector. The projector
SVGA 1	PC Systems provided in the projector. The projector
	chooses a proper system and displays it.
	chooses a proper system and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 buttons to move the red frame
	pointer to the PC System Menu icon.
2	Press the Point d button to move the red arrow pointer to
	the system that you want to set, and then press the SELECT

button.

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

PC System Menu

The PC System Menu icon displays the system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in the

PC Adjust Menu. (p30, 31)

28

Image 28

Contents Model LC-XB26 LC-XB21 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticeFront Part Names and FunctionsBack Bottom Rear Terminal Part Names and FunctionsTop Control Remote Control @1 !3Laser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangePart Names FunctionsRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImageAdjustable Feet InstallationPositioning the Projector For the U.S.A. and Canada Connecting the AC Power Cord200 240 V AC Connecting to a Computer InstallationConnecting to Video Equipment CableConnecting to Component Video Equipment Monitor OUTWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector Basic OperationHow to Operate the On-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar Basic OperationZoom and Focus Adjustment Auto Setup FunctionKeystone Adjustment Picture Freeze FunctionNo Show Function BasicTimer Function Sound AdjustmentVolume MuteInput Source Selection Computer InputComputer Input Computer System Selection AutoMode PC System MenuAuto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoVideo Input Input button Video Computer Video buttonInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentImage1~4 CinemaImage button Dynamic Standard Cinema BlackboardGreen Color TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingAuto Setup LanguageSetting Logo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockPIN code lock To Change the PIN Code Lock settingTo Change the PIN Code Lamp counter reset Factory defaultFan Factory default FanMaintenance and Cleaning CleaningProjector is shut down and the Warning indicator lights red Then check the matters belowCleaning the Air Filters Attaching the Lens CoverCleaning the Projector Cabinet Cleaning the Projection LensMaintenance & Cleaning Lamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control does not work AppendixComputer 2 cannot be selected Terminal item cannot be selectedMenu Tree System Setting Image SelectIndicators and Projector Condition Projector ConditionFreq Compatible Computer SpecificationsKHz Technical Specifications Accessories Optional PartsThis cable is used for RGB Scart 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal HDB15-PIN Terminal DVI-IPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Key to better communications Canada