Eiki LC-WS250 owner manual Computer Input, Input Source Selection Computer 1 RGB, Input Menu

Computer Input

Input Source Selection (Computer 1: RGB)

Direct Operation

Choose Computer 1(RGB) by pressing the COMPUTER 1 button on the remote control or press the INPUT button on the top control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

HDMI

COMPUTER 1 button

Top Control

INPUT button

Computer 1

Computer 2 *

HDMI

Video

S-video

Computer 1(RGB)

Computer 1(Scart)

Input Menu

*COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.

	Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1.
3	When Computer 1 is selected, press the Point ► to
	access the submenu items. Use the Point ▲▼ buttons

to select the RGB input source and then press the SELECT button.

Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).

Computer

1

27