Eiki LC-WS250 owner manual Computer Input Image Mode Selection

Computer Input

Image Mode Selection

Direct Operation	Remote Control
Select the desired image mode among Dynamic, Standard,
Real, Blackboard (Green), Colorboard, Image 1, Image 2,	ASPECT
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.

IMAGE button

	Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Image
	select and then press the Point ► or the SELECT
	button.
2	Use the Point ▲▼ buttons to select the desired item
	and then press the SELECT button.

Dynamic

For viewing pictures in a bright room.

Standard	Image Select Menu
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
Press the Point ► button at Colorboard, and then use the
Point ▲▼ buttons to switch the desired item (Red, Blue,
Yellow, Green) and then press the SELECT button.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1- 4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 34-35).

IMAGE button Dynamic

Standard

Real

Blackboard(Green)

Colorboard

Image 1

Image 2

Image 3

Image 4

33