Eiki LC-WS250 owner manual Screen Size Adjustment, Screen Menu

Computer Input

Store Store Menu

To store the adjusted data, select Store and press the Point

►or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-4)in the Image Mode Selection on page 33.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Screen and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons select the desired item and
	then press the SELECT button .

Normal

Provide the image to fit the screen size while maintaining the aspect ratio of input signal.

True

Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector automatically switches to the panning mode. Use the Point ◄►▲▼ buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear.

Full

Provide the full screen image.

Custom

Provide the last stored aspect screen image.

A confirmation box appears and then select Yes..

Screen Menu

Note:

•This projector can not display any resolution higher than 1920 x 1200. If your computer’s resolution is higher than that, lower the resolution before connecting to the projector.

•The image data other than 1280 x 800 is modified to fit the screen size in initial mode.

•True and Digital zoom +/- are not available when the 4:3 or 16:9 function is selected in the Screen aspect (p.50).

•True, Full, and Digital zoom +/– can not be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.29).

35