Eiki LC-X70 instruction manual Picture Image, List Mode

Page 35

PICTURE IMAGE

4

To move the red frame pointer to "MENU", and then press the

SELECT button. The message "OK"? is displayed. Move the

pointer to [Yes] and then press SELECT button. The COLOR MANAGEMENT menu will be exited and the display will return to the IMAGE ADJUST menu. (At this time, the image will stop being paused and normal projection will resume.) After chang- ing the COLOR MANAGEMENT settings, use the IMAGE ADJUST menu to store the changed settings.

COLOR SELECTION MODE

CANCEL

The mode will return to the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in this case.)

QUIT

The COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" using the POINT buttons and change to the next mode (LIST mode).

LIST MODE

The check mark will be cleared and the effect of the setting adjustment for that line on the projected images will be momentarily canceled.

COLOR PALETTE

The mode will return to COLOR SELECTION mode so that you can re-adjust the setting for the color in that line. This option is not avail- able if the check mark has been cleared by the operation immediate- ly above.)

DEL

The setting adjustment for the color in that line will be canceled.

ALL DEL

The setting adjustment for the colors in all lines will be canceled.

COLOR M.

The mode will return to POINTER mode.

Auto picture control

Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2)

Off ······· Auto picture control OFF position.

L1 ········ Auto picture control LEVEL 1 position.

L2 ········ Auto picture control LEVEL 2 position.

COLOR SELECTION

MODE

Level and phase

Gamma

adjustment palette.

adjustment palette.

 

LIST

 

CANCEL

 

QUIT

 

LIST MODE

 

 

 

COLOR PALETTE

DEL

ALL DEL MENU COLOR M.

NOTE;

If you press the COLOR M. button on the remote control, the COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "MENU" using the POINT buttons and store the settings.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Multimedia Projector Model LC-X70To the Owner Voor de klanten in Nederland Safety InstructionsEsperanza Rancho Santa Margarita CA CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignHOT AIR Exhausted PreparationName of Each Part of Projector For U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Room Light Preparation Positioning ProjectorInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Refer to P13 Connecting ProjectorTerminals of Projector Connect computer output Digital DVI-D type to this terminalAudio Input External Audio Equipment Audio Speaker Connecting to ComputerTerminals A Projector Front of the projectorA Projector Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlInside the Battery Compartment BOX Before OperationSelect Button Point Volume + ButtonsTimer Button Zoom ButtonPoint Volume + / Buttons TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Used to select Press Menu Button while connecting to PC input sourceUsed to adjust picture image Before Operation Menu BARTurning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorCorrected by Keystone adjustment Adjusting ScreenKeystone Adjustment Focus adjustment may not function properly if the image isSound Adjustment Rgbav Hdcp Computer InputSelecting Input Source Selecting Computer SystemPC System Menu Automatic MULTI-SCAN SystemAuto Auto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image 1~4 Picture Image SelectImage Level Select Direct Image Level Select MenuScreen Menu Picture Screen AdjustmentSelect Video When video input signal is connected to Y-Pb/CbVideo Input VideoAV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Picture level adjusted for picture with fine toneProvides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Picture Image Picture Image AdjustmentsImage Adjust Menu Picture Image List ModeWhite balance Blue Color tempWhite balance Red White balance GreenSetting Menu SettingSetting Menu Menu position AnamorphicBlue back DisplayTo change the code of Projector To change the code of the Remote Control UnitPower management Remote controlUSB Wireless Mouse modeProjector mode Appendix Operating Wireless MouseInstallation Operating Wireless MouseProjector so that Ventilation Slots are not obstructed MaintenanceSection AIR Filter Care and Cleaning on next IndicatorIndicatorPull up and remove Appendix AIR Filter Care and CleaningCleaning Projection Lens RecommendationLamp Replace Lamp ReplacementPointer to Yes and then press Select button Message Lamp replace counter reset? is displayed. MoveReset Lamp Replace Counter Appendix Lamp Replace CounterTroubleshooting Function does not Remote Control UnitWireless Mouse Does not workAppendix Indicators and Projector Condition Resolution Appendix Compatible Computer SpecificationsPC source Menu TreeSystem Setting Sound Technical Specifications Computer INPUT-1 and Monitor OUT Terminals Analog Appendix Configurations of TerminalsControl Port Connector USB Connector Series BAppendix Optional Parts Lens ReplacementAppendix Key to better communications Canada
Related manuals
Manual 56 pages 34.59 Kb

LC-X70 specifications

The Eiki LC-X70 is a high-performance multimedia projector designed for a variety of applications, including education, business, and large venues. Known for its versatility and advanced features, the LC-X70 offers exceptional image quality and user-friendly operation.

One of the standout features of the LC-X70 is its impressive brightness level, reaching up to 6,500 ANSI lumens. This high brightness capability makes it ideal for use in well-lit environments, ensuring that presentations maintain clarity and visibility. Coupled with a high contrast ratio, the projector delivers vivid colors and deep blacks, enhancing the overall viewing experience.

The LC-X70 utilizes advanced 3LCD technology, which ensures accurate color reproduction and reduces the risk of color fading over time. This technology enables the projector to produce images that are both bright and vibrant, making it suitable for projecting detailed graphics and videos. Furthermore, it supports resolutions up to WUXGA (1920 x 1200), allowing it to display high-definition content with stunning clarity.

Connectivity is another strong point for the Eiki LC-X70. It boasts a variety of input options, including HDMI, VGA, and USB ports, allowing users to connect multiple devices seamlessly. This flexibility makes it easy to integrate the projector into existing setups, whether in classrooms, conference rooms, or auditoriums. The inclusion of wireless connectivity options further enhances its usability, enabling users to project from laptops, tablets, and smartphones without the need for cables.

In addition to its impressive performance features, the LC-X70 is designed with user convenience in mind. It includes a user-friendly remote control, simplifying navigation through settings and options. The projector also features a built-in speaker, providing adequate audio output for presentations. For extended use cases, the projector is equipped with a long-lasting lamp, resulting in reduced maintenance costs.

In terms of portability, the Eiki LC-X70 is relatively compact and lightweight, making it easy to transport between locations. Its robust construction ensures durability, making it a reliable choice for users who require a projector that can withstand regular use.

Overall, the Eiki LC-X70 stands out as a powerful, versatile projector, ideal for various professional environments. With its combination of high brightness, excellent color accuracy, and multiple connectivity options, it enhances presentations, lectures, and meetings, ensuring that content is delivered with maximum impact.
Top Page Image Contents