Eiki LC-X70 instruction manual Appendix, Operating Wireless Mouse, Installation

Page 41

APPENDIX

OPERATING WIRELESS MOUSE

Wireless Remote Control Unit is not only able to operate this projector but also function as a wireless mouse for most Personal Computers. POINT button, drag ON/OFF button and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen.

INSTALLATION

To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied) is required. Make sure that the mouse driver is properly installed in your computer. And make sure that the mouse port (or USB port) of a Personal Computer is activated.

1

Connect the mouse port (or USB port) of your computer to

Control Port (or USB connector) of this projector with Control

 

Cable (or USB cable). (Refer to page 12, 13 for connection.)

2

Turn the projector on first, and then turn on your computer.

When the computer is switched on first, Wireless Mouse may not

work properly.

Note : When your computer has no mouse port, connect Serial Port of your computer to Control Port of the projector with Control Cable for Serial Port (supplied).

OPERATING WIRELESS MOUSE

When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, Drag ON/OFF button, LEFT CLICK button and RIGHT CLICK button on Wireless Remote Control Unit.

POINT button

Used to move PC mouse pointer. The pointer is moved

 

DRAG ON

corresponding with the direction you are pressing.

INDICATOR

 

LEFT CLICK button

This button has the same function as the left button in a PC mouse. Press this button and the POINT button to drag a selected screen object.

RIGHT CLICK button

This button has the same function as the right button in a PC mouse.

DRAG ON/OFF button

 

DRAG ON/OFF

Use this button and the POINT button to drag a selected screen

button

POINT button

object. Press and release the Drag ON/OFF button, DRAG ON

INDICATOR lights green and the remote control is in Drag mode.

(Move the pointer)

Use the POINT button in the direction that you want to drag the

 

screen object. Press and release the Drag ON/OFF button again or

 

press any other button, to drop the object at the new screen location.

 

LEFT CLICK button

RIGHT CLICK button

(left button of the mouse)

(right button of the mouse)

41

Image 41
Contents Multimedia Projector Model LC-X70To the Owner Voor de klanten in Nederland Safety InstructionsEsperanza Rancho Santa Margarita CA CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignHOT AIR Exhausted PreparationName of Each Part of Projector For U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Room Light Preparation Positioning ProjectorInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorConnect computer output Digital DVI-D type to this terminal Refer to P13Terminals Connecting to ComputerA Projector Front of the projector Audio Input External Audio Equipment Audio SpeakerA Projector Connecting to Video EquipmentInside the Battery Compartment BOX Operation of Remote ControlBefore Operation Laser Pointer FunctionTimer Button Point Volume + ButtonsZoom Button Select ButtonPoint Volume + / Buttons TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Used to adjust picture image Press Menu Button while connecting to PC input sourceBefore Operation Menu BAR Used to selectTurning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorKeystone Adjustment Adjusting ScreenFocus adjustment may not function properly if the image is Corrected by Keystone adjustmentSound Adjustment Selecting Input Source Computer InputSelecting Computer System Rgbav HdcpPC System Menu Automatic MULTI-SCAN SystemAuto Auto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Direct Picture Image SelectImage Level Select Menu Image 1~4Screen Menu Picture Screen AdjustmentVideo Input When video input signal is connected to Y-Pb/CbVideo Select VideoSelecting Video System Component Video Signal FormatPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Picture level adjusted for picture with fine toneProvides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Picture Image Picture Image AdjustmentsImage Adjust Menu Picture Image List ModeWhite balance Red Color tempWhite balance Green White balance BlueSetting Menu SettingSetting Menu Blue back AnamorphicDisplay Menu positionPower management To change the code of the Remote Control UnitRemote control To change the code of ProjectorUSB Wireless Mouse modeProjector mode Installation Operating Wireless MouseOperating Wireless Mouse AppendixSection AIR Filter Care and Cleaning on next MaintenanceIndicatorIndicator Projector so that Ventilation Slots are not obstructedCleaning Projection Lens Appendix AIR Filter Care and CleaningRecommendation Pull up and removeLamp Replace Lamp ReplacementReset Lamp Replace Counter Message Lamp replace counter reset? is displayed. MoveAppendix Lamp Replace Counter Pointer to Yes and then press Select buttonTroubleshooting Wireless Mouse Remote Control UnitDoes not work Function does notAppendix Indicators and Projector Condition Resolution Appendix Compatible Computer SpecificationsPC source Menu TreeSystem Setting Sound Technical Specifications Control Port Connector Appendix Configurations of TerminalsUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals AnalogAppendix Optional Parts Lens ReplacementAppendix Key to better communications Canada
Related manuals
Manual 56 pages 34.59 Kb

LC-X70 specifications

The Eiki LC-X70 is a high-performance multimedia projector designed for a variety of applications, including education, business, and large venues. Known for its versatility and advanced features, the LC-X70 offers exceptional image quality and user-friendly operation.

One of the standout features of the LC-X70 is its impressive brightness level, reaching up to 6,500 ANSI lumens. This high brightness capability makes it ideal for use in well-lit environments, ensuring that presentations maintain clarity and visibility. Coupled with a high contrast ratio, the projector delivers vivid colors and deep blacks, enhancing the overall viewing experience.

The LC-X70 utilizes advanced 3LCD technology, which ensures accurate color reproduction and reduces the risk of color fading over time. This technology enables the projector to produce images that are both bright and vibrant, making it suitable for projecting detailed graphics and videos. Furthermore, it supports resolutions up to WUXGA (1920 x 1200), allowing it to display high-definition content with stunning clarity.

Connectivity is another strong point for the Eiki LC-X70. It boasts a variety of input options, including HDMI, VGA, and USB ports, allowing users to connect multiple devices seamlessly. This flexibility makes it easy to integrate the projector into existing setups, whether in classrooms, conference rooms, or auditoriums. The inclusion of wireless connectivity options further enhances its usability, enabling users to project from laptops, tablets, and smartphones without the need for cables.

In addition to its impressive performance features, the LC-X70 is designed with user convenience in mind. It includes a user-friendly remote control, simplifying navigation through settings and options. The projector also features a built-in speaker, providing adequate audio output for presentations. For extended use cases, the projector is equipped with a long-lasting lamp, resulting in reduced maintenance costs.

In terms of portability, the Eiki LC-X70 is relatively compact and lightweight, making it easy to transport between locations. Its robust construction ensures durability, making it a reliable choice for users who require a projector that can withstand regular use.

Overall, the Eiki LC-X70 stands out as a powerful, versatile projector, ideal for various professional environments. With its combination of high brightness, excellent color accuracy, and multiple connectivity options, it enhances presentations, lectures, and meetings, ensuring that content is delivered with maximum impact.