Classe Audio CA-2100 owner manual Extraordinary longevity Robust protection

Page 10

extraordinary longevity

robust protection

10

Another benefit of having worked with highly refined circuit designs so extensively over many years is that we have vast experience in what works well over the long term.

By using only the highest quality parts to begin with, and then using them in an informed way as a result of both accelerated aging experiments and actual long- term experience, we are able to design and manufacture products which we are confident will stand the test of time.

We are confident that your new Classé product will give you many years of trouble-free reliability and musical enjoyment, just as previous Classé products have given their owners.

Finally, your new Classé amplifier incorporates a variety of protection circuits, all designed to protect both the amplifier and your loudspeakers against dangerous fault conditions. Significantly, these protection circuits do not intrude upon

or limit the normal performance of the amplifier; rather, they simply put the amplifier into protection mode when confronted with abnormal conditions. These conditions include:

•output overload

•DC offset

•AC mains voltage (outside of normal tolerances)

•excessive operating temperatures

If any of the first three conditions occurs on either channel (any of which might harm either your amplifier or possibly your loudspeakers), the amplifier will immediately go into protection mode. In such a case, a Channel LED indicator will blink red, indicating the channel with the fault, and the sound will be muted until the fault can be righted.

If the fault is not channel-related, e.g. AC mains voltage out of range, the Standby LED will blink. In all cases, the unit will need to be re-started once the cause of the fault condition has been rectified.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CA-2100 Power Amplifier Page Important Safety Instructions Serial #Contents Word about installation Welcome to the Classé familyUnpacking and Placement Unpacking your amplifier Placement VentilationCustom installations Serial number Operating voltageWarm up/break-in period Please read this manual… Special Design Features Extraordinary longevity Robust protection Front Panel Standby button & LED indicatorOff + Channel LED on Mode button Channel status LED indicatorsSelect button Rear Panel Balanced XLR InputSingle-Ended RCA Input Speaker OutputsClassé can Bus Control Ports IR Input and OutputAC Mains Input RS-232 Control Port This DB-9 connector has two purposesDC Trigger Input and Output AC Mains FuseInitial Setup Configure your amplifierMake your preamp connections Make your speaker connectionsCare and Maintenance Double-check all your connectionsNo sound, and one or more Channel LEDs is blinking red TroubleshootingNo sound, and no Channel LED is lit Amplifier keeps shutting offAC mains fuse is blown Specifications Dimensions V1.9 020405

CA-2100 specifications

The Classe Audio CA-2100 is a high-performance stereo power amplifier that exemplifies the brand's commitment to delivering exceptional sound quality, robust construction, and advanced technology. Designed for audiophiles and music enthusiasts, the CA-2100 offers outstanding amplification capabilities, ensuring that even the most nuanced audio details are captured and reproduced with clarity.

One of the standout features of the CA-2100 is its impressive power output. With a rating of 200 watts per channel at 8 ohms, and 400 watts at 4 ohms, this amplifier provides ample headroom to drive a wide range of speakers with ease. Whether you're listening to delicate acoustic performances or the most demanding orchestral pieces, the CA-2100 can handle it all without distortion. Its dual-mono architecture ensures that each channel is powered independently, minimizing crosstalk and delivering a pure, immersive stereo experience.

The CA-2100 incorporates advanced Class AB amplification technology, which strikes a perfect balance between the efficiency of Class D and the sound quality associated with Class A amplifiers. This design allows the amplifier to deliver warm, rich sound while maintaining the dynamic responsiveness crucial for live performances.

A key characteristic of the CA-2100 is its premium build quality. The amplifier features an aluminum chassis that not only enhances durability but also contributes to effective heat dissipation. This thoughtful design helps maintain optimal operating temperatures, ensuring longevity and reliable performance over time. The amplifier is also equipped with a high-quality power supply that delivers stable and consistent power to the output stage.

Additional features of the CA-2100 include a variety of input options, including balanced XLR and single-ended RCA connectors. This versatility allows users to integrate the amplifier into a wide range of audio systems with ease. Furthermore, the CA-2100 is designed with user-friendly functionality, featuring a straightforward layout with intuitive controls.

In summary, the Classe Audio CA-2100 stands out in the realm of audio amplification with its powerful performance, elegant design, and advanced technology. It serves as an excellent choice for those seeking to elevate their listening experience, delivering music in its most authentic form. Whether in a dedicated listening room or a high-end home theater, the CA-2100 is sure to impress even the most discerning audiophiles.
Top Page Image Contents