Classe Audio CA-2100 Front Panel, Standby button & LED indicator, Off + Channel LED on

Page 11

Front Panel

1Standby button & LED indicator

The front panel Standby button will toggle the amplifier between operate, its fully operational state, and a standby mode that leaves the amplifier off, yet ready to respond to system commands via any of the supported control options (e.g. IR input, DC trigger, CAN Bus, or RS-232).

The current state of the amplifier is indicated by the LED indicator in the center of the Standby button. The state of this LED indicates the following:

•

on

=

standby

•

flashing (on power-up)

=

initialization

• off + Channel LED on

=

operate

•

flashing (after power-up)

=

AC mains voltage out of range

When in standby, the amplifier’s gain stages are powered down. Only a small power supply and control circuit remain on, consuming relatively little power. Fortunately, since the output stages by their nature conduct a great deal of current, they warm up and sound their best very quickly.

If you are not going to use the amplifier for an extended period of time, perhaps while traveling for a vacation, we suggest you disconnect it from the AC mains. Please be certain that the amplifier is in standby prior to disconnecting it from the AC mains.

Also, it is a good practice to physically disconnect any and all valuable electronics from the AC mains during electrical storms, as a lightning strike anywhere near your home can put a tremendous surge on the AC mains that can easily damage any piece of electronics, no matter how well designed and protected. The best protection in the case of severe electrical storms is to simply remove the electronics from any connection with the power grid.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CA-2100 Power Amplifier Page Serial # Important Safety InstructionsContents Welcome to the Classé family Word about installationUnpacking your amplifier Placement Ventilation Unpacking and PlacementOperating voltage Custom installations Serial numberWarm up/break-in period Please read this manual… Special Design Features Extraordinary longevity Robust protection Off + Channel LED on Standby button & LED indicatorFront Panel Select button Channel status LED indicatorsMode button Balanced XLR Input Rear PanelSpeaker Outputs Single-Ended RCA InputIR Input and Output Classé can Bus Control PortsAC Mains Fuse RS-232 Control Port This DB-9 connector has two purposesDC Trigger Input and Output AC Mains InputConfigure your amplifier Initial SetupMake your speaker connections Make your preamp connectionsDouble-check all your connections Care and MaintenanceAmplifier keeps shutting off TroubleshootingNo sound, and no Channel LED is lit No sound, and one or more Channel LEDs is blinking redAC mains fuse is blown Specifications Dimensions V1.9 020405

CA-2100 specifications

The Classe Audio CA-2100 is a high-performance stereo power amplifier that exemplifies the brand's commitment to delivering exceptional sound quality, robust construction, and advanced technology. Designed for audiophiles and music enthusiasts, the CA-2100 offers outstanding amplification capabilities, ensuring that even the most nuanced audio details are captured and reproduced with clarity.

One of the standout features of the CA-2100 is its impressive power output. With a rating of 200 watts per channel at 8 ohms, and 400 watts at 4 ohms, this amplifier provides ample headroom to drive a wide range of speakers with ease. Whether you're listening to delicate acoustic performances or the most demanding orchestral pieces, the CA-2100 can handle it all without distortion. Its dual-mono architecture ensures that each channel is powered independently, minimizing crosstalk and delivering a pure, immersive stereo experience.

The CA-2100 incorporates advanced Class AB amplification technology, which strikes a perfect balance between the efficiency of Class D and the sound quality associated with Class A amplifiers. This design allows the amplifier to deliver warm, rich sound while maintaining the dynamic responsiveness crucial for live performances.

A key characteristic of the CA-2100 is its premium build quality. The amplifier features an aluminum chassis that not only enhances durability but also contributes to effective heat dissipation. This thoughtful design helps maintain optimal operating temperatures, ensuring longevity and reliable performance over time. The amplifier is also equipped with a high-quality power supply that delivers stable and consistent power to the output stage.

Additional features of the CA-2100 include a variety of input options, including balanced XLR and single-ended RCA connectors. This versatility allows users to integrate the amplifier into a wide range of audio systems with ease. Furthermore, the CA-2100 is designed with user-friendly functionality, featuring a straightforward layout with intuitive controls.

In summary, the Classe Audio CA-2100 stands out in the realm of audio amplification with its powerful performance, elegant design, and advanced technology. It serves as an excellent choice for those seeking to elevate their listening experience, delivering music in its most authentic form. Whether in a dedicated listening room or a high-end home theater, the CA-2100 is sure to impress even the most discerning audiophiles.
Top Page Image Contents