Initial Setup, Conﬁgure your ampliﬁer

Important:

conﬁguring balanced/ single-ended operation

Initial Setup

Your new Classé ampliﬁer is quite simple to set up and enjoy. Please follow the steps outlined below in order to safely set up and use your new ampliﬁer.

The AC mains connection should be the last connection you make on your new power ampliﬁer. In addition, it is always a good idea to power up your power ampliﬁer(s) last, after everything else has been powered up and has stabilized. .

Conversely, it is good practice to power the ampliﬁer(s) down ﬁrst when shutting down the system, as this prevents any transients from other components from getting through to your loudspeakers.

1.Unpack everything according to the included instructions. Be careful when doing so, as this ampliﬁer is quite heavy.

2.Place your ampliﬁer (be sure to read “Unpacking and Placement”) and connect it to the AC mains.

This includes deciding on the location, making sure you have adequate ventilation, and adequate clearance for all the wires behind the ampliﬁer. Once accomplished, connect the ampliﬁer directly to the AC mains. Do not use extension cords, as most are not suitable for the current sometimes required by your ampliﬁer.

3.Conﬁgure your ampliﬁer.

The Select and Mode buttons are used when conﬁguring your ampliﬁer for how you would like it to operate.

While in standby, pressing the Select button will cause the Channel LEDs to light up, indicating how the ampliﬁer is currently conﬁgured (either balanced or single-ended) for each channel.

One of the Channel LED indicators will be blinking, indicating that you may select either balanced or single-ended operation for that channel. Press the Mode button to toggle between either the balanced mode or the single- ended mode of operation, as indicated by which of the two channel LEDs for that channel is blinking.

Press the Select button again to select the other channel, and press the Mode button to select the conﬁguration for that channel.

To ﬁnish, press and release the Select button until both Channel LEDs are off.

Make sure you conﬁgure the ampliﬁer to use the type of input connection you will be using.

CA-2100 specifications

The Classe Audio CA-2100 is a high-performance stereo power amplifier that exemplifies the brand's commitment to delivering exceptional sound quality, robust construction, and advanced technology. Designed for audiophiles and music enthusiasts, the CA-2100 offers outstanding amplification capabilities, ensuring that even the most nuanced audio details are captured and reproduced with clarity.

One of the standout features of the CA-2100 is its impressive power output. With a rating of 200 watts per channel at 8 ohms, and 400 watts at 4 ohms, this amplifier provides ample headroom to drive a wide range of speakers with ease. Whether you're listening to delicate acoustic performances or the most demanding orchestral pieces, the CA-2100 can handle it all without distortion. Its dual-mono architecture ensures that each channel is powered independently, minimizing crosstalk and delivering a pure, immersive stereo experience.

The CA-2100 incorporates advanced Class AB amplification technology, which strikes a perfect balance between the efficiency of Class D and the sound quality associated with Class A amplifiers. This design allows the amplifier to deliver warm, rich sound while maintaining the dynamic responsiveness crucial for live performances.

A key characteristic of the CA-2100 is its premium build quality. The amplifier features an aluminum chassis that not only enhances durability but also contributes to effective heat dissipation. This thoughtful design helps maintain optimal operating temperatures, ensuring longevity and reliable performance over time. The amplifier is also equipped with a high-quality power supply that delivers stable and consistent power to the output stage.

Additional features of the CA-2100 include a variety of input options, including balanced XLR and single-ended RCA connectors. This versatility allows users to integrate the amplifier into a wide range of audio systems with ease. Furthermore, the CA-2100 is designed with user-friendly functionality, featuring a straightforward layout with intuitive controls.

In summary, the Classe Audio CA-2100 stands out in the realm of audio amplification with its powerful performance, elegant design, and advanced technology. It serves as an excellent choice for those seeking to elevate their listening experience, delivering music in its most authentic form. Whether in a dedicated listening room or a high-end home theater, the CA-2100 is sure to impress even the most discerning audiophiles.