Eiki LC-SXG400L owner manual 4Infrared Remote Receiver Back, Reset button

Part Names and Functions

Rear Terminal

✽ !4 !3 !2 !1 !0

!0R/C JACK

When using the wired remote control, connect the wired remote control to this jack with a remote control cable (supplied).

!1AUDIO MONITOR OUTPUT JACK (VARIABLE) This jack outputs the audio signal from computer or video equipment to external audio equipment (pp.20–22).

!2MONITOR OUTPUT TERMINAL (ANALOG) This terminal outputs the video signal from computer to external video equipment (p.20).

!3CONTROL PORT CONNECTOR

When controlling the projector from a computer, connect the computer to this connector with a control cable (supplied).

!4Infrared Remote Receiver (Back)

The infrared remote receiver is also located in the front (pp.10, 16).

✽RESET button

A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

12