Konica Minolta Network Setup user manual Device Model Name, Device Description

Page 17

4 Changing the Device Setup

You can configure and view the following items on the General tab.

Device Model Name

This is the device model name. You cannot change the device model name here.

Device Name

This is the device management name. You can type up to 16 characters into the text box to input a new name. However, if the existing device management name exceeds 16 characters, you can type up to 255 characters for a new name.

Only ASCII characters can be typed in. If asterisks (*) appear in the device name, non-ASCII characters have been used for naming the device.

Device Description

This is a description of the device. You can type up to 16 characters into the text box to input a new description. However, if an existing description of the device exceeds 16 characters, you can type up to 255 characters for a new description.

Only ASCII characters can be typed in. If asterisks (*) appear in the device description, non-ASCII characters have been used for describing the device.

4.After you are finished making the settings you want, click the OK button. This displays the device properties with the changed settings in blue.

5.If the settings are correct, click the OK button.

The community name input dialog box appears only if the SNMP community name has been changed to something other than the default name. Type in the community name and then click OK.

12

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Network Setup Trademark Acknowledgements WelcomeContents Changing the Device Setup Contents System Requirements Starting PageScope Network Setup Installing and Starting PageScope Network SetupInstalling PageScope Network Setup Double-click the Add/Remove Programs icon Uninstalling PageScope Network SetupBrowsing Network Devices Screen Configuration➀ Menu bar ➁ Toolbar for the device list➂ Device list Device Name DeviceIP Address Device Model Name➄ Browser display area ➃ Status bar➅ Toolbar for the browser display area ➆ URL fieldNetWare Printing Verifying Device Setup StatusGeneral TCP/IP Displaying the Device Alert PropertyDisplaying Device Output Tray Information Configuring Device Information Changing the Device SetupDevice Description IP Address Setup Obtain an IP address automatically Configuring TCP/IPRaw Port Number Specify an IP address manuallyVerify the setup. See 4.3.5 Verifying the Setup NetWare Print SetupEthernet Frame Type Print Queue Scan RateIf you are using bindery service NetWare Selecting the ModeIf you are using NDS NetWare 4.x or To select an existing print queue Selecting the Print QueueTo create a new print queue Selecting Users for Event Notification Verifying the Setup Changing the Device Setup Selecting a Protocol Option SetupSpecifying the Search Range Add device manually Specify IP discovery rangeSpecifying Bootp Option Setup Disable Specifying Polling SettingsChanging the Password Appendix Glossary Subnet mask Port numberHttp//konicaminolta.com
Top Page Image Contents