4 Changing the Device Setup
2.After you are finished configuring the setup, click the Next button.
Note
•To configure a NetWare print setup, the server must be bound to at least one IPX frame.
4.3.2 Selecting the Mode
Use the procedures in this section to select the server you want to configure as the print server, or the NDS context.
If you are using bindery service (NetWare 3.x):
1.Put a check mark into the NetWare 3.x Bindery Server check box.
2.Click the button to display the Mode Select dialog box, which shows a list of servers on the NetWare network.
3.Select the server you want to configure as the print server, and then click the OK button.
4.When everything is the way you want, click the Next button.
17