Konica Minolta Network Setup NetWare Print Setup, Verify the setup. See 4.3.5 Verifying the Setup

Page 20

4 Changing the Device Setup

4.3 NetWare Print Setup

Note

•You must have NetWare Client 32 installed on your system in order to setup for NetWare printing.

•NetWare supervisor privileges are required in order to change the NetWare Print Setup. You must login to the NetWare network with supervisor privileges in order to configure NetWare for printing.

•You must have IPX protocol installed on your device in order to configure a NetWare print setup.

•If you have already configured a NetWare print setup with another tool, the existing configuration will be deleted when you complete this setting.

Perform the following steps to configure a device for NetWare printing.

1.On the device list, click the icon of the device you want to configure.

2.Select Device Setup on the Setup menu to display the Device Setup dialog box.

You could also click the toolbar button.

3.Click the NetWare Printing tab.

4.Perform the following steps.

•Set up the print server. See 4.3.1 Setting up the Print Server.

•Select the mode. See 4.3.2 Selecting the Mode.

•Set up the print queue. See 4.3.3 Selecting the Print Queue.

•Select users for event notification. See 4.3.4 Selecting Users for Event Notification.

•Verify the setup. See 4.3.5 Verifying the Setup.

Note

•Clicking the NetWare Printing tab downloads the device configuration. Downloading can take anywhere from a few seconds to 20 or 30 seconds or more. Wait for the download procedure to complete before trying to do anything else.

•The community name input dialog box appears only if the SNMP community name has been changed to something other than the default name. Type in the community name and then click OK.

15

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Network Setup Welcome Trademark AcknowledgementsContents Changing the Device Setup Contents System Requirements Starting PageScope Network Setup Installing and Starting PageScope Network SetupInstalling PageScope Network Setup Uninstalling PageScope Network Setup Double-click the Add/Remove Programs iconScreen Configuration Browsing Network Devices➀ Menu bar ➁ Toolbar for the device list➂ Device list Device Device NameIP Address Device Model Name➃ Status bar ➄ Browser display area➅ Toolbar for the browser display area ➆ URL fieldNetWare Printing Verifying Device Setup StatusGeneral Displaying the Device Alert Property TCP/IPDisplaying Device Output Tray Information Changing the Device Setup Configuring Device InformationDevice Description Configuring TCP/IP IP Address Setup Obtain an IP address automaticallySpecify an IP address manually Raw Port NumberNetWare Print Setup Verify the setup. See 4.3.5 Verifying the SetupPrint Queue Scan Rate Ethernet Frame TypeSelecting the Mode If you are using bindery service NetWareIf you are using NDS NetWare 4.x or Selecting the Print Queue To select an existing print queueTo create a new print queue Selecting Users for Event Notification Verifying the Setup Changing the Device Setup Option Setup Selecting a ProtocolSpecifying the Search Range Specify IP discovery range Add device manuallySpecifying Bootp Option Setup Specifying Polling Settings DisableChanging the Password Appendix Glossary Port number Subnet maskHttp//konicaminolta.com
Top Page Image Contents