Konica Minolta Network Setup user manual Specify an IP address manually, Raw Port Number

Page 19

4Changing the Device Setup

•Specify an IP address manually

When this option is selected, you can set the IP address

manually. Enter the following values.

- IP Address

Device IP address

-Subnet Mask Subnet mask used with the network

-Default Gateway Default IP router address for the device

Raw Port Number

Enter the Raw port number used for peer-to-peer printing.

4.After making the settings you want, click the OK button. This displays the device properties with the changed settings in blue.

5.If the settings are correct, click the OK button.

A message asking for confirmation to continue the setup appears.

6.Click the Yes button.

A message stating that it is necessary to reset may appear. For equipment that can be reset, the following dialog appears.

7.If there are no problems with resetting now, click the Reset Now button.

Note

•The community name input dialog box appears only if the SNMP community name has been changed to something other than the default name. Type in the community name and then click OK.

•If both DHCP and BOOTP are selected, DHCP is given priority.

14

Image 19

Contents Network Setup Trademark Acknowledgements WelcomeContents Changing the Device Setup Contents System Requirements Installing PageScope Network Setup Installing and Starting PageScope Network SetupStarting PageScope Network Setup Double-click the Add/Remove Programs icon Uninstalling PageScope Network Setup➁ Toolbar for the device list Screen ConfigurationBrowsing Network Devices ➀ Menu bar➂ Device list Device Model Name DeviceDevice Name IP Address➆ URL field ➃ Status bar➄ Browser display area ➅ Toolbar for the browser display areaGeneral Verifying Device Setup StatusNetWare Printing TCP/IP Displaying the Device Alert PropertyDisplaying Device Output Tray Information Configuring Device Information Changing the Device SetupDevice Description IP Address Setup Obtain an IP address automatically Configuring TCP/IPRaw Port Number Specify an IP address manuallyVerify the setup. See 4.3.5 Verifying the Setup NetWare Print SetupEthernet Frame Type Print Queue Scan RateIf you are using bindery service NetWare Selecting the ModeIf you are using NDS NetWare 4.x or To select an existing print queue Selecting the Print QueueTo create a new print queue Selecting Users for Event Notification Verifying the Setup Changing the Device Setup Selecting a Protocol Option SetupSpecifying the Search Range Add device manually Specify IP discovery rangeSpecifying Bootp Option Setup Disable Specifying Polling SettingsChanging the Password Appendix Glossary Subnet mask Port numberHttp//konicaminolta.com