Konica Minolta TWIN Driver manual

Scanning a document

3

5 Specify the necessary settings.

–Refer to “Driver settings” on page 4-1.

–The “Duplex Scanning” is appears only if optional reverse automat- ic document feeder DF-605 is installed.

6 Load the document face up in the document feed tray of the automatic document feeder.

7 Click the [Scan] button.

–If “Pull Scan” was selected from the “Scan Type” drop-down list in the driver settings dialog box, scanning begins.

–If “Push Scan” was selected from the “Scan Type” drop-down list in the driver settings dialog box, a message appears on the compu- ter screen and in the control panel display, indicating that scanning begins when the [Start] key on the machine is pressed. Press the [Start] key and then, scanning begins.

TWAIN Driver 3-2