Konica Minolta TWIN Driver manual Transmission error, Scanning

Error messages

5

Transmission error

Computer display message:

Cause	Remedy
The machine has not started up.	• Turn off the machine, and then check
	that the USB cable and network cable
A system crash may have occurred on the
	are correctly connected.
computer or the machine during transmis-	• After checking the USB cable and net-
sion.	work cable, turn on the machine again.
The USB cable or network cable was not cor-	• If the error is still not corrected, contact
	your technical representative.
rectly connected during transmission.

Note

The network cable can be used only when the optional network interface card NC-503 or image controller IC-206 is installed.

Scanning

Computer display message:

Cause	Remedy
If a TWAIN scan job is sent at the same time	Wait until the copy or scan operation is fin-
as a copy job, the machine may stop while	ished.
scanning.

TWAIN Driver 5-5