Konica Minolta TWIN Driver manual Installing the Twain driver by using Plug and Play

Installing the TWAIN driver

2

2.3Installing the TWAIN driver by using Plug and Play

Connecting to the computer’s USB port

When this machine is connected to a computer with a USB cable, Plug and Play detects the device, and then installation of the necessary drivers begins.

1 Start Windows, and then insert the CD-ROM into the computer’s CD- ROM/DVD drive.

2 Turn on this machine.

3 After this machine starts up and is ready for copying, connect it to the computer with the USB cable.

This machine is detected, and the Found New Hardware Wizard (Add New Hardware Wizard on Windows Me) appears.

The remainder of the procedure differs depending on the operating system. Follow the instructions in the dialog boxes that appear for the operating sys- tem being used.

-For Windows XP and Windows Server 2003: “Installing using Plug and Play on Windows XP/Server 2003” on page 2-6

-For Windows Vista: “Installing using Plug and Play on Windows Vista” on page 2-7

-For Windows 2000: “Installing using Plug and Play on Windows 2000” on page 2-9

-For Windows Me: “Installing using Plug and Play on Windows Me” on page 2-10

TWAIN Driver 2-5