CD Operation
Playing A CD
1 Slide the FUNCTION SWITCH (8) to the CD position.
2 Press the OPEN/CLOSE BUTTON (22/40) to
open the CD DRAWER (14). Choose your selected disc tray by sliding the CD tray manually, and then place a disc in the tray with labeled side of the disc facing up.
3 Press the OPEN/CLOSE BUTTON (22/40)again to close the CD DRAWER (14). The display will show “ - - “for a few seconds, then the total number of tracks on the disc will be displayed. If there’s no disc in the tray 1, it will read the tray 2 & 3 automatically. “00” will be shown when there’s no disc in the CD DRAWER (14).
4 Press the FORWARD SKIP BUTTON (6/52) or the BACKWARED SKIP BUTTON (7/53) to select a track.
5 Press the PLAY/PAUSE BUTTON (26/47) to start playback. The PLAY/PAUSE INDICATOR (27) will light up.
6
7 To pause playback, press the PLAY/PAUSE BUTTON(26/47). The PLAY/PAUSE INDICATOR
(27)will flash. Press the PLAY/PAUSE BUTTON (26/47) again to resume playback.
8 To stop playback, press the STOP BUTTON(25/46) and the PLAY/PAUSE INDICATOR (27) will go off.
Search Forward And Reverse During Play
PLAYBACK
1 Press and hold the FORWARD SKIP BUTTON (6/52) or the BACKWARD SKIP BUTTON (7/53) to search forward or backward through the selected track.
2 Release the button at the desired point, playback will resume automatically.
9