
CD Operation
Repeat Playback
1 To repeat a single track, choose the track that you want to repeat, then press the PLAY/PAUSE BUTTON (26/47) to start the track. Press the REPEAT BUTTON (23/48) once to repeat this track. The REPEAT INDICATOR (24) will flash.
2 To repeat all tracks, press the PLAY/PAUSE BUTTON (26/47) to start the CD. Press the REPEAT BUTTON (23/48) twice to repeat all tracks. Once the CD ends, it will start over again from the beginning of the CD. The REPEAT INDICATOR (24) will remain on.
3 To erase the repeat function, press the REPEAT BUTTON (23/48) again until the REPEAT INDICATOR (24) is off.
Programmed Playback
1 Press the Program button (49) on the remote control. The Sensor (18) will flash.
2 Press the FORWARD SKIP (6/52) or BACKWARD SKIP (7/53) to display the first track you want to program into memory.
3 Press the Program button (49) again to memorize the track.
4 Repeat steps 2 and 3 above to program other tracks.
5 Press the Play/Pause button (26/47) to start programmed playback.
6 To clear programmed tracks from memory, press the Open/Close button(22/40) or turn power off.
Notes: Program, Repeat and Random can only be set for a single disc.
A maximum of 19 tracks can be programmed.
Disc Selection
1 Press DISC SKIP - (5/45) or DISC SKIP + (4/44) to select the desired disc, the DISC INDICATOR (10, 11, 12) will flash.
2 Press the PLAY/PAUSE BUTTON (26/47) to start playback.
10