Crosley CR703 instruction manual Cassette & Radio Operation, Cassette Operation, Antenna

Page 9

Cassette & Radio Operation

Cassette Operation

1 Slide the FUNCTION SWITCH (8) to the TAPE position.

2 Insert a prerecorded tape through the CASSETTE DOOR (29).Tape will slide into the cassette mechanism and start playing.

3 Adjust the volume level by turning the VOLUME KNOB (9).

4 For fast forwarding, press the CASSETTE EJECT/F.F (28) half way in. Pressing again, will stop the fast forwarding and return the cassette to the playing mode.

5 To stop and eject the cassette,press the CASSETTE EJECT/F.F (28) in completely.

6 When one side of the tape finishes playing, the cassette will automatically stop.

Note:Remove the tape from the unit when it is not in use or stopped.

Radio Operation

1 Slide the FUNCTION SWITCH (8) to the Radio position.

2 Slide the AM/FM SWITCH (21) to the desired tuning band.

3 Select the desired radio station by rotating TUNING KNOB (20).

4 Adjust the VOLUME KNOB (9) to the desired sound level.

Antenna

Antenna: for FM reception, the unit is provided with a FM WIRE ANTENNA (37) , move the wire until the reception is clear and with no interferences. For AM reception, the unit is provided with a directional build-in ferrite antenna. Rotate the set to find the position in which the best reception is obtained. Do not connect the FM WIRE ANTENNA (37) to any outside antenna.

8

Image 9
Contents CR703 Important Safety Instruction Do not Open SpecificationAbout This Manual Unit Controls Control LocatorsRemote Controls Power Source Getting StartedUnpacking Turntable Operation Turntable OperationCassette Operation Cassette & Radio OperationRadio Operation AntennaPlaying a CD CD OperationDisc Selection Repeat PlaybackAuxiliary Inputs Connecting Optional EquipmentGeneral TroubleshootingLimited Manufacturers Warranty