Intel PCM-6896 manual USB Controller, USB Keyboard Support, USB Mouse Support, Init Display First

Page 71

IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/33, select Auto to enable BIOS support.

The choices: Auto, disable

USB Controller

Select Enabled if your system contains a Universal Serial Bus controller and you have USB peripherals.

USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus

controller and you have a USB keyboard.

USB Mouse Support

Select Enabled if your system contains a Universal Serial Bus controller and you have a USB mouse

Init Display First

This item allows you to active PCI slot or onboard first.

The choice: PCI slot, onboard

AC97 Audio

The default setting of Auto enables the AC97 audio if it is detected onboard

IDE HDD Block Mode

Select Enabled only if your hard drives support block mode.

Power on Function

Select the different manners for powering on the system.

The choices: Keyboard 98, password, any key, hot key, button only,

mouse click, mouse move.

KB Power on Password

The system will ask for a password, after entering the correct

password the keyboard can then be used.

Image 71

Contents PCM-6896 Acknowledgments Copyright NoticeFCC Statement Packing ListMessage to the Customer Aaeon Customer ServicesProduct Warranty Dear Customer Contents AwardBIOSetup Driver Installation General Information Introduction Features Specifications Page Audio Interface Chipset 815E SDD Interface Board Layout Board Dimensions Installation Removing the CPU Safety precautionsInstalling a CPU Open Closed Setting jumpersSystem Memory Installing Dram DIMMsLocation of Jumpers & Connectors Jumpers List of JumpersConnectors List of ConnectorsClear Cmos Selection JP1 JP2 & JP3 For COM3 & COM4 Selec- tion PC/104 Plus Voltage Select JP6 Front Panel Connectors JP5Speaker Out and Line out JP4 RS-232/422/485 COM 2 JP8, JP7 CPU/SDRAM Speed Select JP9 DiskOnChip socket Configure DOC as a boot device DiskOnChip DOC 2000 InstallationDiskOnChip Address Selection JP10 CPU Fan Power Connector CN1 USB Connector CN5 & CN6 Primary IDE Hard Drive Connector CN7 IDE Hard Drive Connectors CN7IDE Hard Drive Connector CN7 IDE Hard Drive Connector CN7ATX Power Connector CN11 IR Connector CN10Digital Visual Interface Connector CN12 Keyboard and Mouse Connector CN13 VGA Display Connector CN14 Audio Connector CN15 Base-Tx Ethernet Connector CN17 Connecting the floppy drive Floppy drive connector CN19Floppy Drive Connector CN19 Digital I/O Connector CN20 Audio Out Connector 1 Watt CN22 Compact Flash Connector Compact Flash ConnectorAward Bios Setup To Enter Setup Before Boot Press DEL KEY Starting setupGetting help Case of ProblemsThese keys helps you navigate in Setup Setup keysPower Management Setup Standard Cmos FeaturesAdvanced Bios Features Advanced Chipset FeaturesSet Supervisor/User Password PnP/PCI ConfigurationLoad Fail-Safe Defaults Load Optimized DefaultsDate and Time Configuration Standard Cmos FeaturesPage Drive a Drive B Base Memory Halt OnMemory Other Memory Extended MemoryVirus Warning Advanced Bios FeaturesCPU Internal Cache/External Cache Swap Floppy Drive OS Select For DRAM64MB-Select Typematic Rate Setting- Key strokes repeat at aTypematic Dealy Msec- Sets the delay time Typematic Rate Chars/Sec- Sets the numberReport No FDD For WIN 95- Wheather report HDD S.M.A.R.T CapabilitySdram Cycle Time Tras/Trc Advanced Chipset Features Sdram CAS Latency TimeSdram RAS-to-CAS Delay Delayed Transaction System Bios CacheableVideo Bios Cacheable CPU Latency Timer System Memory Frequency Paging Mode Control AGP Graphics Aperture Size Display Cache FrequencyRas# Precharge Timing RAS-to-CAS OverrideRas# Timing IDE Primary/Secondary Master/Slave PIO Integrated PeripheralsOn-Chip Primary PCI IDE On-Chip Secondary PCI IDEUSB Controller IDE HDD Block ModePower on Function KB Power on PasswordOnboard FDC Controller Hot Key Power OnUart Mode Select UART2 Duplex ModeOnboard Parallel Port Parallel Port ModeECP Mode Use DMA Onboard Serial Ports 1, 2,3,4Watch Dog Timer Acpi Function Power Management SetupPower Management Video Off Method Suspend Type Suspend ModeHDD Power Down Video Off In SuspendReload Global Timer Events Power On By RingResume By Alarm Resources Controlled By PnP/PCI ConfigurationsPnP OS Installed Reset Configuration DataPC Health Status Shutdown TemperatureSpread Spectrum Clock By Slight AdjustFrequency/Voltage Control Auto Detect DIMM/PCI CLKLoad Fail-Safe Defaults Load Optimized Default Load Optimized DefaultEnter Password Set Supervisor PasswordSet User Password Save to Cmos and Exit Save to Cmos and ExitQuit without Saving Drivers Installation Installing Drivers Installing Chipset Driver for Windows 95/98 Installing Ultra ATA Storage Driver for Windows 95/98 ==Select the Optional Search for best Lan driver Installing LAN for Windows 95/98Installing VGA for Windows 95/98 Installing Audio for Windows 95/98 Please perform this procedure first Installing Security Driver for Windows NTInstalling Ultra ATA Storage Driver for Windows NT Installing VGA for Windows NT Installing Audio for Windows NT ==Intel Pro Adapter will appear ==Click on OK Installing LAN for Windows NTInstalling VGA for Windows Installing Audio for Windows Installing LAN for Windows