Adjust the volume, Choose your sound, Sound mode

Control) protocol. EasyLink-compliant devices that are connected through HDMI can be controlled by a single remote control.

Note

•• Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device.

•• Philips does not guarantee 100% interoperability with all HDMI-CEC devices.

Before you start

•Connect your SoundBar to the HDMI- CEC compliant device through HDMI connection.

•Make the necessary connections described in the quick start guide, and then select the correct audio source for the connected device.

•On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices.

EasyLink controls

With EasyLink, you can control your SoundBar, TV, and other connected HDMI-CEC compliant devices with a single remote control.

•One-touch standby: If one-touch standby is enabled, your SoundBar can switch to standby with the remote control of the TV or other HDMI-CEC devices.

This section helps you use the SoundBar to play audio from connected devices.

Before you start

•Make the necessary connections described in the quick start guide and the user manual.

•Switch the SoundBar to the correct source for other devices.

1 Press +/- (Volume) to increase or decrease a volume level.

•To mute sound, press (Mute).

•To restore the sound, press (Mute) again or press +/- (Volume).

This section helps you choose the ideal sound for your video or music.

Select predefined sound modes to suit your video or music.

1 Press SOUND to select a sound option from the display panel.

•AUtO: Automatically select a sound setting based on the sound stream.

•OFF: Experience the original sound of your movies and music, without added sound effects.

•POWEr: Enjoy thrilling arcade sounds, ideal for action-packed videos and loud parties.

EN 9