In AUX mode, within three seconds, press VOL-, BASS-,and Treble-.
»»When the factory settings restore is complete, the SoundBar automatically switches off and restarts.
•no audio/video play from a connected device.
Apply factory settings
You can reset your SoundBar to the default settings programmed at the factory.
1
5 Wall mount
Note
•• Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country.
•• Before wall mounting, make sure the wall can support the weight of your SoundBar.
•• Before wall mount, you need not remove the three rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter.
4mm
> 25mm
For information about how to wall mount your SoundBar, see the quick start guide.
12EN