Philips HTL3120 user manual MP3 player, USB storage devices

Page 12
Press AUDIO SYNC +/- to synchronize the audio with the video.
Press AUTO VOL to turn auto volume on or off.
Press TREBLE +/- or BASS +/- to change the frequency.
Press NIGHT MODE to turn night mode on or off.

HIGH: Spice up your dull movies and music with added sound effects.

CLEAr: Hear every detail in your music and clear voices in your movies.

dEEP: Experience spoken words and music vocals in comfort.

OWN: Personalize the sound based on your preferences.

Surround sound mode

Experience an immersive audio experience with surround sound modes.

1 Press SURR to select a sound option from the display panel.

AUtO: Intelligently select the best surround sound mode based on the media played.

OFF:Two-channel stereo sound. Ideal for listening to music.

SURR: Multi-channel surround output.

Equalizer

Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.

1

Auto volume

Turn the auto volume on to keep the volume constant when you switch to a different source.

1

Synchronize picture and sound

If the audio and video are not synchronized, delay the audio to match the video.

1

Night mode

For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.

1

Note

•• If auto volume is set to turned on, you cannot enable the night mode.

MP3 player

Connect your MP3 player to play your audio files or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO-IN connector on your SoundBar.

2 Press AUDIO-IN on the remote control.

3 Press the buttons on the MP3 player to select and play audio files or music.

USB storage devices

Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.

What you need

• A USB storage device that is formatted for FAT file systems, and complies with the Mass Storage Class.

• An MP3 or WMA file on a USB storage device

1 Connect a USB storage device to the SoundBar.

2 Press USB on the remote control.

10EN

Image 12
Contents HTL3120 Register your product and get support atPage Contents Safety Risk of electric shock or fireRisk of swallowing batteries Use only microfiber cloth to clean the product Mains fuseCare for your product Care of the environmentRemote control Your SoundBarHelp and support Main unitSwitch your source to the Hdmi BluetoothSwitch to Bluetooth mode USB modeConnectors Side connectorsRear connectors Connect and set up SoundBar to the Hdmi ARC connector on the TVConnect to TV Connect to TV through Hdmi ARCSet up EasyLink HDMI-CEC control Connect audio from TV and other devicesOption 1 Connect audio through a digital optical cable Option 2 Connect audio through a digital coaxial cableAdjust the volume Sound modeChoose your sound EasyLink controlsMP3 player USB storage devicesPlay audio through Bluetooth Auto standbyApply factory settings Wall mountNo audio/video play from a connected device Screw length/diameterBluetooth Remote control batteriesAmplifier AudioTroubleshooting SoundEuropean Declaration of Conformity All rights reserved HTL312012UMV3.0