Intel DG33FB manual Preface, Intended Audience, Use Only for Intended Applications, Conventions

Page 3

Preface

This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel® Desktop Board DG33FB.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization

The chapters in this Product Guide are arranged as follows:

1Desktop Board Features: a summary of product features

2Installing and Replacing Desktop Board Components: instructions on how to install the Desktop Board and other hardware components

3Updating the BIOS: instructions on how to update the BIOS

AError Messages and Indicators: information about BIOS error messages and beep codes

BRegulatory Compliance: safety and EMC regulations and product certifications

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE

Notes call attention to important information.

iii

Image 3
Contents Intel Desktop Board DG33FB Product Guide Disclaimer Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementDocument Organization PrefaceIntended Audience Use Only for Intended ApplicationsTerminology Box ContentsContents Error Messages and Indicators Regulatory Compliance ContentsTables Feature Summary Desktop Board FeaturesRelated Links Supported Operating SystemsDesktop Board Components Desktop Board FeaturesLabel Description Processor Main MemoryType Timing Intel G33 Graphics Subsystem Intel G33 Express ChipsetDesktop Board Features Audio Subsystem Legacy Input/Output I/O ControllerLAN Subsystem LED Color LED State Indicates RJ-45 LAN Connector LEDsExpandability Hi-Speed USB 2.0 SupportEnhanced IDE Interface Serial ATASecurity Passwords Hardware Management FeaturesSerial ATA and IDE Auto Configuration PCI and PCI Express* Auto ConfigurationPower Management Features Hardware Monitoring and Fan Speed ControlChassis Intrusion Hardware Support Power ConnectorsInstantly Available PC Technology Wake from PS/2 Keyboard/Mouse Energy STAR* Qualified BatterySpeaker Real-Time ClockBefore You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board DG33FB Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Close the Load Plate Installing the Processor Fan Heat SinkConnecting the Processor Fan Heat Sink Cable Installing and Removing Memory Guidelines for Dual Channel Memory ConfigurationRemoving the Processor Three DIMMs Use DDR2 DIMMs Installing DIMMsInstalling a Dimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting the Diskette Drive Cable Connecting the Diskette Drive CableConnecting the IDE Cable Connecting the IDE Cable Connecting a Serial ATA Cable Connecting the Serial ATA Sata CablesInternal Headers Connecting to the Internal HeadersConnecting to the Ieee 1394a Header Ieee 1394a Signal Header NamesPin Signal Name Connecting to the Serial Port Header Connecting to the Chassis Intrusion HeaderConnecting to the Alternate Front Panel Power LED Header Front Panel Header Connecting to the Front Panel HeaderConnecting to the USB 2.0 Headers USB 2.0 Header Signal NamesBack Panel Audio Connectors Connecting to the Flexible Audio SystemConnecting Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Connecting Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Precaution Replacing the BatteryViktigt Προσοχή Pozor Removing the Battery Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the ISO Image Bios Update File Obtaining the Bios Update FileUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityRecovering the Bios Bios Error Messages Error Messages and IndicatorsBios Beep Codes Bios Error MessagesIntel Desktop Board DG33FB Product Guide Regulatory Compliance Safety RegulationsPlace Battery Marking Safety RegulationsEuropean Union Declaration of Conformity Statement Regulatory Compliance Español Product Ecology StatementsRecycling Considerations DeutschRussian FrançaisMalay PortugueseTürkçe Lead-Free Desktop BoardLead-Free Board Markings EMC Regulations EMC RegulationsEnsure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component Certifications