Intel DG33FB manual Updating the Bios with the Iflash Memory Update Utility

Page 61

Updating the BIOS

CAUTION

Do not interrupt the process or the system may not function properly.

Follow these instructions to upgrade the BIOS using the ISO Image BIOS file:

1.Download the ISO Image BIOS file.

2.Using software capable of uncompressing and writing an ISO image file to CD, burn the data to a blank CD.

NOTE

Copying the ISO Image BIOS file to CD will not work. The completed CD should contain multiple files and a directory.

3.Insert the CD that was created in the CD-ROM drive of the computer to be upgraded and boot the system.

4.When the "Press ENTER to continue booting from CD-ROM" prompt appears, press the Enter key. The system will boot from the hard drive if no key is pressed within 15 seconds.

5.At the "Welcome to the Intel Desktop Board BIOS Upgrade CD-ROM" page, press any key to confirm the BIOS upgrade operation.

6.Wait for the BIOS upgrade process to complete.

CAUTION

DO NOT POWER DOWN YOUR COMPUTER before the update is complete. The update may take up to 5 minutes.

Updating the BIOS with the Iflash Memory Update Utility

With the Iflash Memory update utility you can update the system BIOS from a bootable CD-ROM, bootable USB flash drive, or other bootable USB media. The utility available on the Intel World Wide Web site provides a simple method for creating a bootable CD-ROM that will automatically update your BIOS. The Iflash BIOS update files can also be extracted locally to your hard drive and copied to a bootable USB flash drive or other bootable USB media.

The Iflash Memory update utility allows you to:

Update the BIOS and Intel Management Engine in flash memory

Update the language section of the BIOS

NOTE

Review the instructions distributed with the update utility before attempting a BIOS update.

61

Image 61
Contents Intel Desktop Board DG33FB Product Guide FCC Declaration of Conformity Revision HistoryCanadian Department of Communications Compliance Statement DisclaimerIntended Audience PrefaceUse Only for Intended Applications Document OrganizationTerminology Box ContentsContents Error Messages and Indicators Regulatory Compliance ContentsTables Feature Summary Desktop Board FeaturesRelated Links Supported Operating SystemsDesktop Board Components Desktop Board FeaturesLabel Description Main Memory ProcessorType Timing Intel G33 Graphics Subsystem Intel G33 Express ChipsetDesktop Board Features Legacy Input/Output I/O Controller Audio SubsystemLAN Subsystem LED Color LED State Indicates RJ-45 LAN Connector LEDsEnhanced IDE Interface Hi-Speed USB 2.0 SupportSerial ATA ExpandabilitySerial ATA and IDE Auto Configuration Hardware Management FeaturesPCI and PCI Express* Auto Configuration Security PasswordsHardware Monitoring and Fan Speed Control Power Management FeaturesChassis Intrusion Hardware Support Power ConnectorsInstantly Available PC Technology Wake from PS/2 Keyboard/Mouse Speaker BatteryReal-Time Clock Energy STAR* QualifiedBefore You Begin Installing and Replacing Desktop Board ComponentsPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board DG33FB Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Close the Load Plate Installing the Processor Fan Heat SinkConnecting the Processor Fan Heat Sink Cable Guidelines for Dual Channel Memory Configuration Installing and Removing MemoryRemoving the Processor Three DIMMs Use DDR2 DIMMs Installing DIMMsInstalling a Dimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting the Diskette Drive Cable Connecting the Diskette Drive CableConnecting the IDE Cable Connecting the IDE Cable Connecting a Serial ATA Cable Connecting the Serial ATA Sata CablesInternal Headers Connecting to the Internal HeadersIeee 1394a Signal Header Names Connecting to the Ieee 1394a HeaderPin Signal Name Connecting to the Chassis Intrusion Header Connecting to the Serial Port HeaderConnecting to the Alternate Front Panel Power LED Header Connecting to the USB 2.0 Headers Connecting to the Front Panel HeaderUSB 2.0 Header Signal Names Front Panel HeaderBack Panel Audio Connectors Connecting to the Flexible Audio SystemConnecting Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Connecting Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperJumper Settings for the Bios Setup Program Modes Clearing PasswordsJumper Setting Mode Description Precaution Replacing the BatteryViktigt Προσοχή Pozor Removing the Battery Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the ISO Image Bios Update File Obtaining the Bios Update FileUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityRecovering the Bios Bios Beep Codes Error Messages and IndicatorsBios Error Messages Bios Error MessagesIntel Desktop Board DG33FB Product Guide Place Battery Marking Safety RegulationsSafety Regulations Regulatory ComplianceEuropean Union Declaration of Conformity Statement Regulatory Compliance Recycling Considerations Product Ecology StatementsDeutsch EspañolMalay FrançaisPortuguese RussianTürkçe Lead-Free Desktop BoardLead-Free Board Markings EMC Regulations EMC RegulationsEnsure Electromagnetic Compatibility EMC Compliance Board-Level Certification Markings Product CertificationsProduct Certification Markings Europe Chassis and Component Certifications