Installing and Replacing Desktop Board Components
Installing and Removing a PCI Express x16 Card
CAUTION
When installing a PCI Express x16 card on the Desktop Board, ensure that the card is fully seated in the PCI Express x16 connector before you power on the system. If the card is not fully seated in the PCI Express connector, an electrical short may result across the PCI Express connector pins. Depending on the
Installing a PCI Express x16 Card
1.Observe the precautions in "Before You Begin" on page 25.
2.Place the card in the PCI Express x16 connector (Figure 18, A) and press down on the card until it is completely seated in the connector and the card retention notch on the card snaps into place around the retention mechanism pin on the connector.
3.Secure the card’s metal bracket to the chassis back panel with a screw (Figure 18, B).
Figure 18. Installing a PCI Express x16 Card
39