Intel DG45ID manual Processor, Main Memory

Page 13

Desktop Board Features

Processor

CAUTION

Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the board, or the system may not function properly.

Desktop Board DG45ID supports an Intel processor in the LGA775 package. Processors are not included with the Desktop Board and must be purchased separately. The processor connects to the Desktop Board through the LGA775 socket.

Go to the following locations for more information about:

Instructions on installing or upgrading the processor, page 31 in Chapter 2

Supported processors for Desktop Board DG45ID, http://processormatch.intel.com

Main Memory

NOTE

To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.

The Desktop Board supports the dual or single channel memory configurations defined below.

Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module (DIMM) connectors with gold-plated contacts

Support for:

Non-ECC, 1.8 V, DDR2 800/667 MHz memory

Serial Presence Detect (SPD) memory only

Unbuffered, non-registered single- or double-sided DIMMs (except double-sided DIMMs with x16 organization)

Memory configurations listed below:

Up to 2.0 GB utilizing 256 Mb technology

Up to 4.0 GB utilizing 512 Mb or 1 Gb technology

Up to 8.0 GB utilizing 1 Gb technology

A minimum of 512 MB of total memory is required

13

Image 13
Contents Intel Desktop Board DG45ID Product Guide FCC Declaration of Conformity Revision HistoryCanadian Department of Communications Compliance Statement DisclaimerIntended Audience PrefaceUse Only for Intended Applications Document OrganizationIntel Desktop Board DG45ID Product Guide TerminologyTerm Description Contents Installing and Replacing Desktop Board Components Contents Configuring for RAID Intel Matrix Storage Technology IntelTables Feature Summary Desktop Board FeaturesPeripheral Power ManagementInterfaces HardwareDesktop Board Components Desktop Board FeaturesLabel Description Main Memory ProcessorIntel G45 Graphics Subsystem Intel G45 Express ChipsetHDMI* Technology Support DVI-I SupportIntel Viiv Technology Audio SubsystemPCI Express x16 Graphics LAN Subsystem Legacy Input/Output I/O ControllerLAN Subsystem Software Audio Jack Retasking SupportLAN Connector LEDs LAN Status IndicatorsHi-Speed USB 2.0 Support LED Color LED State IndicatesSerial ATA Intel Rapid Recover Technology Intel RRTExpandability Serial ATA RAIDPCI and PCI Express* Auto Configuration Serial ATA Auto ConfigurationSecurity Passwords Fan Speed, Thermal, and Voltage Monitoring and Control Hardware Management FeaturesChassis Intrusion Power Connectors Power Management FeaturesHardware Support LAN Wake Capabilities Fan HeadersInstantly Available PC Technology Location of the +5 V Standby Power Indicator +5 V Standby Power IndicatorSpeaker BatteryReal-Time Clock Energy STAR* QualifiedIntel Desktop Board DG45ID Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board DG45ID Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Close the Load Plate Installing a Processor Fan Heat SinkRemoving the Processor Connecting the Processor Fan Heat Sink CableGuidelines for Dual Channel Memory Configuration Installing and Removing MemoryTwo or Four DIMMs Three DIMMs Dual Channel Memory Configuration with Four DIMMsUse DDR2 DIMMs Installing DIMMsInstalling a Dimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers and Connectors Connecting to Internal Headers and ConnectorsHD Audio Link Header Pdif ConnectorFront Panel HD Audio Header Back Panel CIR Emitter Output Header Signal Names Front Panel CIR Receiver Input Header Signal NamesPin Signal Name Ground Consumer IR CIR HeadersSerial Port Header Alternate Front Panel Power LED HeaderChassis Intrusion Header USB 2.0 Header Signal Names Front Panel Header Signal NamesFront Panel Header USB 2.0 HeadersIeee 1394a Header Signal Names Connecting to the Audio SystemIeee 1394a Header Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperJumper Settings for the Bios Setup Program Modes Clearing PasswordsJumper Setting Mode Description Precaution Replacing the BatteryViktigt Προσοχή Upozornenie Intel Desktop Board DG45ID Product Guide Removing the Battery Intel Desktop Board DG45ID Product Guide Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the ISO Image Bios Update File Obtaining the Bios Update FileUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityRecovering the Bios Creating Your RAID Set Configuring the Bios for Intel Matrix Storage TechnologySetting Up a RAID Ready System Enabling Intel Rapid Recover Technology Configuring for Intel Rapid Recover TechnologyGo to Advanced Drive Configuration Creating a Recovery Volume Using the RAID Option Creating a Recovery VolumeSelect Protect data using Intel Rapid Recover Technology Mounting the Recovery Disk Disk Synchronization ModeConfiguring for Intel Rapid Recover Technology Select Access Recovery Drive Files Bios Beep Codes Error Messages and IndicatorsBios Error Messages Bios Error MessagesIntel Desktop Board DG45ID Product Guide Place Battery Marking Safety StandardsSafety Standards Regulatory ComplianceEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Español DeutschFrançais MalayRussian PortugueseTürkçe Lead-free 2LI/Pb-free 2LI Board EU RoHS Restriction of Hazardous Substances RoHSLead-Free Second Level Interconnect Marks Description MarkChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Board-Level Certification Markings Product CertificationsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DG45ID Product Guide

DG45ID specifications

The Intel DG45ID is a motherboard that showcases Intel's commitment to integrating advanced technologies for personal computing. Designed primarily for the Intel LGA 775 socket, this motherboard supports a range of Intel processors, including Core 2 Quad, Core 2 Duo, and Pentium D. It caters to users looking for a blend of performance and multimedia capabilities, making it suitable for both casual users and gamers.

One of the standout features of the DG45ID is its support for Intel's Desktop Board DQ45ID, which incorporates several cutting-edge technologies. The motherboard boasts an Intel Q45 Express chipset, ensuring optimized performance and efficient power management. With support for up to 8 GB of DDR2 800/667 MHz memory, the DG45ID handles multitasking and demanding applications with ease, allowing users to run multiple applications without significant slowdowns.

A significant characteristic of the DG45ID is its integrated Intel Graphics Media Accelerator 4500. This graphics solution offers decent performance for everyday tasks and casual gaming without the need for a dedicated graphics card. Users can benefit from features such as dual-display support and hardware acceleration for high-definition video playback, which enhances the overall multimedia experience.

The DG45ID also includes a range of connectivity options. Equipped with multiple USB ports, a Gigabit Ethernet LAN, and integrated audio featuring 5.1 surround sound, users can connect to a variety of devices and establish a comprehensive multimedia setup. The motherboard features SATA II connectors for speedy data transfer, supporting quick connections to hard drives and solid-state drives, ensuring efficient storage management.

For those who prioritize expandability, the DG45ID provides a PCI Express x16 slot for a dedicated graphics card, in addition to multiple PCI Express x1 and legacy PCI slots for additional expansion cards. This allows users to upgrade their systems over time, ensuring longevity and flexibility.

Finally, the DG45ID is designed with reliability in mind, featuring an array of safety and stability features, including advanced thermal management, which helps maintain optimal operating temperatures. Overall, the Intel DG45ID motherboard provides a robust platform for users seeking solid performance, versatile connectivity, and multimedia capabilities in a competitive computing environment. Its blend of technology and design makes it an excellent choice for a wide range of computing needs.